rev counter

[mjtm]

i know there are posts about this but i cant see any of the pics in the to see what wire to use
just need to know what wires at the ecu and tacho end to splice in to to the rev counter working

thanks

 

[frank]

loads of pic,s in the guide for full members eh http://www.micra.org.uk/threads/rev...guide-for-any-pre-facelift.44477/#post-460140
basically a jumpwire from pinout # 2, into the vacant pinout on the plug near the ecu (i forget what colour plug)

 

[jamier2007]

Sorry to hijack, but can you use the same wires for an adjustable rev limiter?

 

[mjtm]

loads of pic,s in the guide for full members eh http://www.micra.org.uk/threads/rev...guide-for-any-pre-facelift.44477/#post-460140
basically a jumpwire from pinout # 2, into the vacant pinout on the plug near the ecu (i forget what colour plug)

thanks but im not member yet and porkpies one i cant get no pics for some reason i am unsure what plug as i cannot see it i think i may be looking in the wrong place thas why i wolud like pic

 

[frank]

there should be 2 or 3 smaller plugs near the ecu one, and a wire that goes in one end, but the wire going out absent

 

[JoeK11]

I've got a problem with this, my car has no wire on the dial plugs either. Do you know which port it is? I'm guessing it'll need power too and one for the clock as well. Is there a photo anywhere of those plugs so I know what I'm missing?

 

[skymera]

I've got a problem with this, my car has no wire on the dial plugs either. Do you know which port it is? I'm guessing it'll need power too and one for the clock as well. Is there a photo anywhere of those plugs so I know what I'm missing?

There might be some pictures on my blog of my wiring. If not I can upload some if I have them still

Sent from my GT-I9100 using Forum Runner

 

[skymera]

Wired to blue grey

Sent from my GT-I9100 using Forum Runner

 

[JoeK11]

Yup, definitely not there, no pink wire either... I appear to have a very odd micra! Checked all 3 plugs too.