Reply to thread

Message

i'd say check continuity between the black wire on the holder and a good earthing point in the car with a multimeter, if you have continuity and no resistance then the wiring is fine, which probably means you have a bad connection on the earth wire pin either in the harness connector or the bulb holder

[QUOTE="Fordy, post: 188494, member: 217"] i'd say check continuity between the black wire on the holder and a good earthing point in the car with a multimeter, if you have continuity and no resistance then the wiring is fine, which probably means you have a bad connection on the earth wire pin either in the harness connector or the bulb holder [/QUOTE]

Verification

Home
K11 Tuning & Mechanical
Rear light problem