catchcan only got 41ml after 343 miles. either it's not cold enough to condense or the plumbing is blocked or there's less oil vapour? needs checking out
[ATTACH=full]53997[/ATTACH]
time to removed the suspension
[ATTACH=full]53996[/ATTACH]
the front pads are wearing evenly at half way down to 13.5mm
[ATTACH=full]53995[/ATTACH] [ATTACH=full]53993[/ATTACH]
[ATTACH=full]54005[/ATTACH]
arm & hubs removed. the LH wheel bearing feels abit loose which may explain the rumbling during fast right turns, may as well replace it next week while its all apart.
[ATTACH=full]53998[/ATTACH] [ATTACH=full]54001[/ATTACH]
dismantled
[ATTACH=full]53999[/ATTACH]
the LH arm is getting abit rusty
[ATTACH=full]54002[/ATTACH]
thankfully the spare arm I got from sophie (bottom) is abit fresher and better to weld
[ATTACH=full]54000[/ATTACH] [ATTACH=full]54004[/ATTACH] [ATTACH=full]54003[/ATTACH]
the machined socket just about clears the hub
[ATTACH=full]53992[/ATTACH]
the extension will fit nicely
[ATTACH=full]53994[/ATTACH]
