after verifying the shape of the satnav mount fits, the next print is to test it can hook onto the locking clip, plus feature a flat round base for the separate mount to glue onto
[ATTACH=full]45834[/ATTACH]
[ATTACH=full]45840[/ATTACH] [ATTACH=full]45842[/ATTACH]
slips on nicely
[ATTACH=full]45838[/ATTACH]
but the lip was too short
[ATTACH=full]45843[/ATTACH]
a bigger issue is the fragile upper section which could easily snap off
[ATTACH=full]45837[/ATTACH] [ATTACH=full]45841[/ATTACH]
disassembled the suction cup, modelled existing parts
[ATTACH=full]45850[/ATTACH]
and remodel the new suction cup mount, removed the weak upper section of the satnav mount
[ATTACH=full]45835[/ATTACH]
printed overnight with gr8 result
[ATTACH=full]45846[/ATTACH] [ATTACH=full]45848[/ATTACH] [ATTACH=full]45844[/ATTACH]
removed the support structure
[ATTACH=full]45845[/ATTACH]
the suction parts still fit
[ATTACH=full]45847[/ATTACH]
bond the mount together with acetone
[ATTACH=full]45849[/ATTACH]
smoothed it all together 
[ATTACH=full]45851[/ATTACH] [ATTACH=full]45855[/ATTACH]
the cam handle had digged abit through the soft smoothed surface but the suction cup still works
[ATTACH=full]45852[/ATTACH] [ATTACH=full]45854[/ATTACH]
finished satnav mount
[ATTACH=full]45853[/ATTACH] [ATTACH=full]45836[/ATTACH]
