i trimmed back the edge of the sunroof to try clear my helmet
[ATTACH=full]37166[/ATTACH]
although kinda forgot the sliding cover uses the track, there's just enough lip left to slide on
[ATTACH=full]27743[/ATTACH]
had a set of BPR6ES, same temp range that i'm using, see if i can use them
[ATTACH=full]37167[/ATTACH]
the head is the same
[ATTACH=full]37162[/ATTACH]
but the hex is 21mm compared to 16mm for the micra
[ATTACH=full]37165[/ATTACH]
so tried to file it down 2.5mm each side
[ATTACH=full]37163[/ATTACH]
but not enough metal there so i'll need to buy a new set instead, meh
[ATTACH=full]37164[/ATTACH]
