Reply to thread

Message: <blockquote data-quote="marco2002" data-source="post: 779268" data-attributes="member: 33317">Thanks Frank Just looked at the picture my crank is in very good condition there was a small mark where the seal sat which I cleaned up with some very fine Emery paper as best I could sat under the car. So does the O ring go behind the seal where the spring sits?On you tube I've seen people use metal inserts on the crank where the journals worn. I'm beginning to think I should have took the housing plate out that the seal sits in and put the new one on in my workshop on the bench.</blockquote>