Offset differences

[karlj]

Does anyone know how much the front hubs poke out by compared to the rear?

 

[frank]

the difference in track is 35mm karl 1360 f, 1325 r
but the difference in poke is about 10mm each side eh (depending on camber)

 

[karlj]

So to keep the wheels inline with each other I'd have to run et 20 on the front and et 10 on the rears (as an example)

 

[markbognor]

^ thats what I'd be doing if I was in the position to be doing so. With a couple of sets of thin spacers to get it spot on.

 

[karlj]

I think it's a better option, cause when I did have all the wellers on the fronts stuck out at least two inches whereas the rears are pretty much flush

 

[Harlen]

I'm running 15x7 Et40 and the front is near enough in line with the lip of the arch whereas the rear sits inside the arch about 20mm deep - Mark's suggestion is definitely the best.