Micra Steering Wheels...

[pietro]

I need a new steering wheel as mine has had it.

I would prefer another Super-S wheel... however if not I would like a momo steering wheel boss kit (for reasonable money) as I have a Mazda momo wheel.

Also what other steering wheels from other cars fit the K10 micra?

Thanks all.

 

[D4R73N]

Im no expert, but i have a feeling, K11 wheels might fit the K10 also...

Dont take my word for it tho...

 

[Mat.T]

Bluebirds, Sunnys, cherrys most 80's-90's nissan wheels should fit, i've got a mountney:

 

[paul_k10_Lx]

how much was ur boss

 

[Mat.T]

about £15 i think

 

[paul_k10_Lx]

where from?

 

[Mat.T]

i ordered it in from my local motor factors

 

[Speedle]

your best bet is a sunny ZX stering wheel quite sporty looking and a direct fit as are almost any nissan steering wheel from the same year and sometimes above. i have personally tested sunny k11 almera primera steering wheels and they are fine also 100nx 200sx wheels will fit

 

[ohc_turbo]

ive got a 200sx wheel on mine, sunny zx wheels are good but fairly rare, a eary cherry turbo wheel is even better style


matt youre dash looks oldskool in brown, brilliant

 

[paul_k10_Lx]

matt have u still got ur old boss?

 

[wildti]

just fitted a sunny GTi-R wheel to my k10 looks and feels really gd

 

[pietro]

anyone selling?

 

[Mark]

A picture of the steering wheel in my Super S

 

[pietro]

Is anyone selling a super s steering wheel or can any advise me on where I can buy a momo boss on ebay. Thanks

 

[Mark]

peitro - go into a local motor factor, i.e halfords, motor mania, etc or whatever near to where you live and buy a boss from there! the boss for mine also fits momo steering wheels and can be bought easily

 

[Mat.T]

Still looking for a wheel? this is on ebay atm very cheap!
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=8034829778

 

[pietro]

Thanks Mat. I have a Mazda one now, having problems grttingthe aftermarket boss to fit, I need to have it milled down by 1mm according to my Micrometer. Will do this on the milling machine when Ihave time today. If this fails I will go for the one above.