• Please only use these forums for blogs, they are not a discussion forum

Luke & Jord's K11

Hi from Luke & Jord, friends who decided to embark on a Micra project.

Decided on the 998 k11 as a basis with the intention of swapping the engine, possibly adding a turbo in the future. For £300 we purchased an R reg vehicle, which had seen better days (especially on it's exterior)

We shall slowly be stripping and replacing the entirety of the car, so keep an eye out for progress updates :)

Here's a picture of our car in its current sorry state:

Micra%20Front_zpsrah9s56g.jpg
 
So we got the car back on a trailer at the start of this week.

First priority was to strip the car down to bare metal, creating a shell for us to work from. We started removing the front bonnet section, making it a bit more accessible for us to work on the engine!

IMG_20151013_193350_zpsdthqup8s.jpg


Next is to remove the braking system and driveshafts!
 
Thanks Andy We'll be sure to give some more.

Got the car up on stands and removed the wheels to show a decent condition braking system; which we started removing immediately:

IMG_20151015_155512_zpsga6zblm4.jpg


Here's the interior (Has the odor of a 1950's caravan) that I'm planning to strip ASAP:

Micra%20Interior_zpszscp5rvv.jpg


On a side note; it's almost certain the previous owner was a mass murderer, judging by the tools left in the boot:

IMG-20151015-WA0002_zpsv6tigub4.jpg


Next is removing the driveshafts!
 
Back
Top