Jap plates
- Thread starter micra.jas
- Start date
ok, i got march nipples 
i got 13x7 plate and its slightly too big for the indent, so you wanna look into 6.5 or even 6 inch american import plates.
I got my plates from ebay with all the legal stuff on it and they didnt care about my car being UKDM
i got 13x7 plate and its slightly too big for the indent, so you wanna look into 6.5 or even 6 inch american import plates.
I got my plates from ebay with all the legal stuff on it and they didnt care about my car being UKDM
about the wiring. where did you get the nipples? was it scrap yard? if so you wanna go back and take the whole wiring look. other that that you probably need to get the power from the current lights. i cant check what bulbs they are now.
btw it takes more then just taking the old off and putting the new on. check my thread
btw it takes more then just taking the old off and putting the new on. check my thread
OP
OP
Thanks dude.
she going into the spray shop to be fitted correctly and all the old handle/lights removed and sprayed e.c.t
I got Antonys old ones and he wired them up so i can just plug and play....but they are messy so im guna have to do some soldering and tidying up abit before fitting them.
Ive seem the american size plates on ebay so will contact the sellers:blues:
she going into the spray shop to be fitted correctly and all the old handle/lights removed and sprayed e.c.t
I got Antonys old ones and he wired them up so i can just plug and play....but they are messy so im guna have to do some soldering and tidying up abit before fitting them.
Ive seem the american size plates on ebay so will contact the sellers:blues:
good luck with it and keep us updated.(Y)
