Improving handling

[CMF_Ezy03]

hey guys what path/mods would be the best bang for buck to improve the handling of the micra/march?...iv noticed it does tend to have a lot of body roll

 

[CMF_FairladyZ]

Sway Bars then Springs.

Adam

 

[CMF_Rudy]

air in ya tires

 

[CMF_nsm]

I always get a laugh out of you Rudy...lol

Nick...

 

[CMF_muzza]

Makita job lol and a white line panhard rod from nsm

 

[CMF_Ezy03]

kk thanks, i was thinking wider/bigger wheels n rubber too...but i dunno what size offset width etc would be best without scraping guards or needing rolling or flaring. i was thinking 14'' or 15'' but dunno offsets that would be good or widths that would be good etc (again without flaring or rolling or need of spacers).

on the list i guess are - panhard rod, f&r swaybars, front strut brace..and possibly springs.

 

[CMF_frank2]

springs make the biggest difference imo, and 165/60/14,s on 5j et 15 will just about clear the front guards, and 165/60/14,s on 5j et 5 will just about clear the rear arches http://www.willtheyfit.com/

 

[CMF_Ezy03]

cool cool, thanks for the info does help. so ill stick to the rear sway for now and springs..also good idea for the panhard rod as well?

 

[CMF_Greo]

these are 15x7+0 with 165/45s

 

[CMF_Ezy03]

gonna be kick ass hard to find anything...its all 18'' and 19'' these days lol

 

[CMF_Ezy03]

frank2 WROTE:

"springs make the biggest difference imo, and 165/60/14,s on 5j et 15 will just about clear the front guards, and 165/60/14,s on 5j et 5 will just about clear the rear arches <a href="http://www.willtheyfit.com/" title="http://www.willtheyfit.com/" target="_blank">http://www.willtheyfit.com/</a>

when lowered or on stock height?

 

[CMF_Greo]

Ezy03 WROTE:

"gonna be kick ass hard to find anything...its all 18'' and 19'' these days lol

Japan is your friend, Jesse Streeter or hit up Freeworks.com.au.

I have coilovers, whiteline panhard rod

 

[CMF_frank2]

Ezy03 WROTE:

when lowered or on stock height?

this height, the et is 10 front and -5 rear on these but with some archrolling done