How to install new clutch cable help

[CMF_Marshal]

How do I install a new clutch cable do I have yo take the clutch pedal off or not?

 

[CMF_Jon (2)]

Clutch cable installation is an easy job. No need to remove the pedal at all, the cable slots in at the top of it.
1. Remove battery and battery tray.
2. Insert cable onto the clutch arm and leave it loose.
3. Route cable and push it into its holders on the firewall and insert the clutch pedal end into the cabin
4. Insert your head under the pedals and put the cable into the notch on the clutch pedal.
5. Go back to the engine bay and tighten up the cable (adjust freeplay and then lock it in place with the locknut.

Should take 5-10mins or so.

 

[CMF_alexzaki1986]

Thanks Jon for your explanation. I know how the clutch cable looks at the end where the arm is as i have fiddled with it to regulate it once, but i didn't know that the end of the cable just goes into a notch.

So if you want to remove the cable from the notch, it's much easier if the cable is loosened at the arm, right? Just wondering hehe

Greetings,
Alex

 

[CMF_Jon (2)]

alexzaki1986 WROTE:

"Thanks Jon for your explanation. I know how the clutch cable looks at the end where the arm is as i have fiddled with it to regulate it once, but i didn't know that the end of the cable just goes into a notch.

So if you want to remove the cable from the notch, it's much easier if the cable is loosened at the arm, right? Just wondering hehe

Greetings,

Alex

No worries!
Yeah loosening it at the gearbox arm (locknut and adjuster) will allow you to remove the cable from the pedal - wont come out otherwise!

 

[CMF_alexzaki1986]

Hehe, i also thought i wont be able to get it off without loosening it at the arm Thanks man!