CMF_Patman
» CMF Member
Got a t25 turbo, manifold, dump pipe and fuel pressure regulator of here a while ago and now as i am selling the micra i dont need it so yours for $100 plus postage. The micra is also for sale if anyone wants it.
FS Turbo
- Thread starter CMF_Patman
- Start date
CMF_Danvillan
» CMF MemberPics of manifold etc?
CMF_Patman
» CMF MemberTurbo
CMF_Patman
» CMF MemberFuel pressure regulator
CMF_Patman
» CMF MemberManifold
CMF_Patman
» CMF MemberDump pipe
CMF_muzza
» CMF Memberim intersted wat else do i need to complete the set up
CMF_Doom
» CMF MemberI have the computer, fuel pump and fuel rail with injectors to go with this build for sale!
CMF_Danvillan
» CMF MemberI dare say you will need to modify the manifold because it looks like a starlet manifold. There maybe further mods needed cause the final turbo position may not be suitable to clear the alt or radiator etc. Same goes for the dump pipe.
I'm speaking from experience having just made custom manifold and dump pipe.
Have a look at the turbo manifolds on this forum and you won't find 2 the same cause they are generally made to suit the turbo. Given the limited space for the turbo I honestly wouldn't be confident this will fit. These eBay starlet manifolds are very thin and don't hold up well with the extreme heat of the turbo. It would be easier to make a custom manifold from steam pipe.
Definitely not a straight bolt on plus everything mentioned by Doom + exhaust +intercooler&piping + bov + boost controllers + oil/water lines + etc,etc
That being said $100 is cheap for the turbo alone if in good condition.
Be warned once you start on the turbo path be prepared to have your hand in your pocket. Costs will blow out big time.
I'm speaking from experience having just made custom manifold and dump pipe.
Have a look at the turbo manifolds on this forum and you won't find 2 the same cause they are generally made to suit the turbo. Given the limited space for the turbo I honestly wouldn't be confident this will fit. These eBay starlet manifolds are very thin and don't hold up well with the extreme heat of the turbo. It would be easier to make a custom manifold from steam pipe.
Definitely not a straight bolt on plus everything mentioned by Doom + exhaust +intercooler&piping + bov + boost controllers + oil/water lines + etc,etc
That being said $100 is cheap for the turbo alone if in good condition.
Be warned once you start on the turbo path be prepared to have your hand in your pocket. Costs will blow out big time.
CMF_frank2
» CMF Memberbut its all very much worth it in the end
CMF_muzza
» CMF Memberprice please
CMF_muzza
» CMF Membercondition of turbo? any shaft play thimgs like that
CMF_Majiga
» CMF Memberlol not sure if i even have hands anymore they went so deep into the pockets on mine
CMF_Patman
» CMF MemberYes the manifold will have to be modded forgot about that, and the turbo is in good condition from what I can see. All if it has just been sitting in the box since a good it just collecting dust.
CMF_Patman
» CMF MemberTo Ben who pm'ed me about the micra I can't respond to that email for some reason so if you want you can contact me on 0458000485. I'm looking at around 3500, has 205000 on it but with engine rebuild at 192000.
CMF_Shifter
» CMF MemberPM sent.
CMF_Willybeamin
» CMF MemberSent you a pm about these bits