Clutch for my 1.3 conversion

[wehey]

Hiya all.
I will shortly be taking delivery of a 1.3 to transplant into my 1.0 1999 k11
Before swapping the engines over I will be fitting some 1.0 pistons for a high compression motor.

During the swap I want to fit a new clutch whilst it's all apart.
Reading various threads on here I think a final power output of 100ish hp would be nice.

What clutch should I be looking at to prevent any slippage?

 

[Agent_Sm1th]

I believe the 180mm facelift clutches should be good to 110bhp. I'm sure it'll be ok with the standard one.

 

[Skinner_87]

I have a new standard 1.3 clutch (minus the release bearing) if ur after one fella

 

[wehey]

I have a new standard 1.3 clutch (minus the release bearing) if ur after one fella

Thanks for the offer mate.
Will it fit with a 1.0L gearbox?

 

[Skinner_87]

Thanks for the offer mate.
Will it fit with a 1.0L gearbox?

Shouldn't be a problem that's what's going in mine next gearbox (a 1 litre box)

 

[wehey]

Shouldn't be a problem that's what's going in mine next gearbox (a 1 litre box)

Excellent. Is is the larger 180mm dia from a facelift and does it come with the pressure plate ?

 

[Skinner_87]

Excellent. Is is the larger 180mm dia from a facelift and does it come with the pressure plate ?

Yes it's the 180mm, all 1.3 clutches are 180mm yep friction plate and pressure plate