Bucket Seat

[micramac]

This may sound realy stupid but i am wanting to put a bucket seat into my micra.........only 1. the drivers seat. the rest of my car will just have the normal seats lol

if i buy the bucket seat, i will need the correct subframe to go with that seat. does this mean that when i take my old seat and subframe out i will need to drill new holes in order for my bucket seat to fit?

 

[Kev]

Topic Moved!

Yes will either have to drill new holes for the subframe or custom fit the subframe from your exsisting OEM seat.

Kev

 

[micramac]

is it hard to drill the holes?

or is it just how it says? just simply drill some new holes?

 

[Kev]

If you've got a good drill and the correct drill bits, i.e metal ones it's not hard at all.

Kev

 

[squarepants]

ive just used my std subframe, iam using a cobra clubman seat, the front 2 bolts line up perfect with the std frames, but the rear 2 bolt holes are slightly out....2 brackets welded on and it will be fine

 

[hoodedreeper]

my cobra buckets are on pre-facelift subframes,will these bolt into a facelift?

 

[squarepants]

yep they will...lol i told you yesterday facelift and prefacelift are the same!

 

[micramac]

i mite be buyin a bucket seat fitted to a 206 subframe.

dus this mean that i jst simply take out my old seat and subframe, and drill the new subframe to the floor them attach the seat then finished?

help? ^^^^^^^^^^^^

 

[TONEY]

no use the micra subframe from you original seat or get one from scrappy
only thing i found was that it sits too high
thats why ive cut mine in half and welded strips of 8mm steel then bolted the seat to that