Back seat removal.

[Littlewood]

I'll be damned if I can get to the bolts or whatever's holding the bc seats in.

Do you have to damge them to get them out?

Cause it seems as though there's a bracket burried in the seat somewhere.

 

[joesouthgate]

are you seat back and bottom 1 piece that fold or seperate. if separate the bottom comes out without and bolts , just pulls up;

 

[Littlewood]

The back folds onto the bottom, they're connected.

 

[joesouthgate]

well then there is bolts under 2 covers just below the seats.

 

[Speedle]

for facelift;
2 covers at the bottom of the seat one each side, 2 10mm bots per side. fold the seats down and out they come.

for a prefacelift there are no bolts for the bottom part of the seat that just pulls out. the rear piece is bolted on the hinge. 1 bot per side IIRC

The back folds onto the bottom, they're connected.

only on facelift models. preface lift come apart seperatly

 

[nexussteve]

Yeah, should just be a matter of bolts at the front, either end under plastic tabs.

Tabs might give you some grief popping off.

 

[Littlewood]

S'all good.

Backs stripped, almost.

The bolts into the arches holding the seatbelts where ##### due to rusted in lol.