Dont knwo if it was already a known fact but was hunting in scrapyard today to find some hose/pipe to go over my carb so i can fit an induction kit.
Found an old Suzuki SJ410 and the air pipe going into the airbox has a small tight 90 degree rubber bend in it which is a very good fit on the carb and gives a perfect angle to fit a universal induction cone thing.
will put some pics up when iv fitted mine
Scrap yard near me has a b reg k10 but it hasnt got the datsun boot. Managed to get 2 x 12" wheels with tyres (for autotesting) Full inlet manifold and carb, coil, dizzy, ht leads, wing mirror, door seal, k11 steering wheel, fuel pump, water pump and loads of other random wires and bits for £20. bargain!
Also managed to custom fit a cobra bucket seat to the standard k10 sunframe today so it still moves on rollers. Quite comfy actually an better than the dirty brown seat i had to start with!
Found an old Suzuki SJ410 and the air pipe going into the airbox has a small tight 90 degree rubber bend in it which is a very good fit on the carb and gives a perfect angle to fit a universal induction cone thing.
will put some pics up when iv fitted mine
Scrap yard near me has a b reg k10 but it hasnt got the datsun boot. Managed to get 2 x 12" wheels with tyres (for autotesting) Full inlet manifold and carb, coil, dizzy, ht leads, wing mirror, door seal, k11 steering wheel, fuel pump, water pump and loads of other random wires and bits for £20. bargain!
Also managed to custom fit a cobra bucket seat to the standard k10 sunframe today so it still moves on rollers. Quite comfy actually an better than the dirty brown seat i had to start with!
