1.3 rear engine mount

[wrighty]

1.3 rear engine mount and cradle

as above

Is looking like i need the cradle aswell

 

[Alexx117]

if k11 should be the same as the 1.0

 

[wrighty]

doesnt line up and nissan have a a diffrent part number for 1.0 and 1.3

 

[Alexx117]

what year is it? could explain why

 

[frank]

the pre98 1.0 does use a different r/mount and crossmember

 

[Alexx117]

why would they do that?! i thought it would be cheaper to mass produce them all the same istead of having two different ones.. and the engines are pretty much the same arent they?

 

[frank]

why would they do that?! i thought it would be cheaper to mass produce them all the same istead of having two different ones.. and the engines are pretty much the same arent they?

the pre98 1.0 g/box, f/w, clutch, shafts, mounts etc are smaller and lighter than all the other k11,s (and are very similar to the k10)

 

[wrighty]

so i need the cradle and mount from a post 98 or a pre 98 1.3 i presume the auto is diffrent

 

[frank]

so i need the cradle and mount from a post 98 or a pre 98 1.3 i presume the auto is diffrent

not sure about the auto :wasntme:
and i,ve lost that japanese webpage showing the 2 cradles side by side (showing the differences)
my r/mount was,nt bang on for some reason (causing a vibe/buzz in the cabin) and i put a spacer in to cure it (in my blog somewhere)