I need a 1.3 manual speedo drive for the K11 1.3 gearbox 98 and up. Even the 1.0 might fit.
1.3 manual speedo drive
- Thread starter micramarch
- Start date
SirChris
Educated Bodger
Send us a picture of you current speedo out the box
OP
OP
I have a fitted a new (1.3) gearbox from a 98 upwards vehicle. It has an electronic speedo. I need a manual speedo.
My old gearbox was the older 1.0 gearbox with a manual speedo.
The old manual speedo (1.0) is much smaller than (1.3) electronic speedo.
From what I have gathered and understood from a few members here the 98 upwards gearbox have a bigger speedo drive. (1.0 or 1.3.
I need the manual speedo drive that is fitted to these boxes.
My car is currently at the garage, when I get the chance I will get a picture.
My old gearbox was the older 1.0 gearbox with a manual speedo.
The old manual speedo (1.0) is much smaller than (1.3) electronic speedo.
From what I have gathered and understood from a few members here the 98 upwards gearbox have a bigger speedo drive. (1.0 or 1.3.
I need the manual speedo drive that is fitted to these boxes.
My car is currently at the garage, when I get the chance I will get a picture.
OP
OP
This is a picture of the speedo drive I need (cut and pasted from Pollymobile bloghttp://www.micra.org.uk/threads/pollymobiles-rebuild.35251/page-22 ) Paul has measured the speedo drives the gearbox hole & electronic speedo was 36.75mm dia while the mechanical speedo was 37mm. This is the one I need
OP
OP
It is the mechanical cable type that I need
u can have my gearbox it's fine and it's all in there for cheap let me take pics
OP
OP
can you Take a picture of the speedo drive
OP
OP
Ok no problem. I know I have been busy too.
OP
OP
Any news ?
am so sorry I haven't been there yet to take pics u will try my best Tommow
skymera
Brutal Honesty
Upload to imgur then copy the IMG tags
