Search results

Hi mate. Side skirts are attached with 2/3 (can't remember) T shape bolts and nuts. Holes are already there covered with plastic seals. Remove and attached the side skirts.

Try 9559

https://www.dropbox.com/s/mljj611izqtrsby/K12esm.zip?dl=0 Let me know if that link works

I've done this for my Micra.. I install the camera inside the car where the 3rd brake lights is. Then connected the live wire and black wire to the reverse lights. So my camera was working only when I put the car on reverse gear.

Try 7423

Check your inbox mate. Hope that helps.

Stefan.. you need to provide the radio serial number start with BP.. and part number start with 76.. otherwise I cannot generate the code.

Try 6290

Sorry can't help you much.. I'm getting the same code: 0000

No power needed.. You can run the same wire from the boot. You can also hide the wire if you take it through the edge of the roof (remove plastic door seal)

Hi.. So sorry.. Can you double check the s/n and p/n.

I've done exactly the same. It was a magic to some ppl. LOL. I kept the switch next to the headlight adjuster.

You could try 0772 or 4772. This is the code for the s/n and p/n. So if it's wrong. Sorry Budd. Can't help any.

Hmmm.. Check your s/n and p/n again.. 99% of the time the app gets the right PIN. I'm surprised the code is wrong.

Common fault with Micra are the boot lock mechanism. Mainly water damage. So if you get faulty one, only way to get into boot by getting inside the car and use a small screwdriver to unlock the boot. Eventually U have to replace the boot release button. I had no major issue with my Micra before...

Speedo lights are very easy to change.. Look for how to remove the radio.. However upon taking the two driver n passenger side plastic pillars panel off, pull up the top of speedo dashboard/plastic (whole dashboard should come off) now should be able to see the speedo lights from outside...

Could it be the heat shield?

Try 4772

Try 7898

Try 0000