Search results

  1. nesty

    How to change the thermostat in my K11?

    I have done one myself in the past and one been done by the garage this week! I always use the Nissan genuine thermostat, about £25 from the main dealer. The bolts could of been in there a long time lubricate bolts with plus gas, not WD40 (I don't know why people reach for WD40, generally GT85...
  2. nesty

    K11 prefacelift idles ok, then all of a sudden low idle and smells like running rich

    I know I have touched upon this before, but still can't get to the bottom of it with my stock Micra. Sometimes it idles fine, then all of a random sudden the revs will drop and idle like it gonna cut out (sometimes it does), then smells like running ultra rich. If you hold your foot on the gas...
  3. nesty

    K&N air filter (drop in) better than stock ones?

    OK thanks Sent from my VOG-L09 using Tapatalk
  4. nesty

    K&N air filter (drop in) better than stock ones?

    What is a decent make of stock air filters? Sent from my VOG-L09 using Tapatalk
  5. nesty

    Testing injector resistance in ohms

    Does anyone know what the injector Ohm resistance meant to be on a preface lift? Thanks
  6. nesty

    ICV O Ring replacement (Prefacelift)

    Many thanks for that. Sent from my VOG-L09 using Tapatalk
  7. nesty

    ICV O Ring replacement (Prefacelift)

    Out of interest anyone know the size of this ring?
  8. nesty

    K&N air filter (drop in) better than stock ones?

    My stock K11 (prefacelift) has a K&N drop in filter, I know it won't make much difference in the performance department. However, I heard that the oil of these filter can play up the mass air sensor sometimes, I just wondered if this is true, as having occasional idle issues, wondered if...
  9. nesty

    High Idle (1100 rpm) Pre-facelift

    Brilliant many thanks
  10. nesty

    High Idle (1100 rpm) Pre-facelift

    I do this when cold or when warm? thanks
  11. nesty

    High Idle (1100 rpm) Pre-facelift

    OK thanks, I'll give it a go. Sent from my VOG-L09 using Tapatalk
  12. nesty

    High Idle (1100 rpm) Pre-facelift

    Ok thanks, which one is the TPS, (is it the plug in the photo), along with the hex screw.
  13. nesty

    High Idle (1100 rpm) Pre-facelift

    Hi One of my K11's is idling slightly high around 1100rpm when warm, 1400rpm when cold then drops down to 1100rpm, it doesn't hunt just stays at that, it's not a massive issue, but prefer to slightly lower it, if there is a way. I've cleaned out the TB & ICV, but hasn't made a difference. Thanks
  14. nesty

    Central locking intermittently not working on both K11's!

    out of interest what fuse does the central locking on the pre-facelift. I squirted some GT85 into the driver lock on one K11, still won't unlock the doors, but does lock them, wondering if a connection issue!
  15. nesty

    Through the MOT today

    Nice one, result for the tinkering! Sent from my VOG-L09 using Tapatalk
  16. nesty

    Through the MOT today

    Only required a tyre, pretty pleased with that!
  17. nesty

    Central locking intermittently not working on both K11's!

    OK thanks, I'll look into it.
  18. nesty

    Central locking intermittently not working on both K11's!

    Hi all I have 2 K11's (prefacelift) and both having central locking issues, where I'd say half of the time the central locking doesn't work, from the drivers door, it's a bit hit and miss on both, not a massive issue, as often only me getting into it, but prefer it to work. They both have a...
  19. nesty

    Breaking Micra K11 news!!!

    A good write up, I still see quite a few on the road, though tend to be coilpack versions. Last year sadly I had to send one to the scrapyard in the sky, as the CVT gearbox went, though been in the family from 2002. I have 2 facelifts now both low mileage, aiming to keep them on the road for...
  20. nesty

    K11 Idle control valve - How to clean

    Apologies, to re-hash this thread again, running like a dream this week, then today cut out randomly twice at lights (though engine was warm), on the ICV is there anything else, which could go wrong? I re-soldered the throttle body about 6 months ago. I saw this online, wondering if new...
Back
Top