Search results

  1. nesty

    K11 pre-facelift running putt, putt, putt,

    Thanks I'll take a look in the week.
  2. nesty

    K11 pre-facelift running putt, putt, putt,

    Just when I get 1 of my Micra's running ok, the other one just suddenly starts playing up. Running fine, going to and from work, then all of a sudden running like loss of power and putt, putt putt effect from the exhaust, like it's missing. I have re-solded the TB earlier in the year. The idle...
  3. nesty

    K11 Prefacelift Nissan stock alarm - Adding touch keys

    Many thanks, appreciated that will help me a lot. I have a strong feeling the module is mounting in the centre console above the ECU.
  4. nesty

    K11 Prefacelift Nissan stock alarm - Adding touch keys

    TBH, probably be easier all around!
  5. nesty

    K11 Prefacelift Nissan stock alarm - Adding touch keys

    Hi Maarten Many thanks, these instruction mimic the Cobra 8510 alarm. I used this prior and it didn't work. The strange thing is on my system, when the system arms, the LED receptacle light is solid LED, it doesn't flash, like I have seen in other videos. I need to get under the dash and find...
  6. nesty

    K11 Prefacelift Nissan stock alarm - Adding touch keys

    Hi I have been looking through my old paperwork and previous owner had a Nissan dealer install a touch key immobilser to my K11 in 1995. The touch keys are cobra looking, but I can't find the module box and I am having issues with trying to add further keys (as down to my last one), the cobra...
  7. nesty

    New throttle body installed

    Hi I purchased a new aftermarket throttle body in the end, fitted it all works fine and got through the MOT today, even the CVT light which was coming on at idle, now not coming on, so looking like a knackered TB.
  8. nesty

    lower Centre console removal

    Hi I have a CVT, I need to remove the lower centre console, can anyone tell me how this is done, is it remove the 2 side screws and the gear selector console needs to be removed prior? Thanks
  9. nesty

    Any prefacelift throttle body for sale?

    Hi I am going to replace my throttle body 1.3 CVT, (1995), to rule out certain issues on my pre facelift. Anyone got a working prefacelift throttle body for sale? The pickings on ebay are fairly slim. I was considering aftermarket, but wasn’t sure if the set up is plug and play, as so to...
  10. nesty

    How does the Throttle body communicate with a CVT gearbox

    I am still trying to find out the solution to the my CVT gearbox light issue (flash code 6), I have noticed now that the revs are hunting badly up and down etc. I am trying to rule out if the TB sensors could be giving wrong signals and this is throwing out the CVT? I have additionally noticed...
  11. nesty

    CVT error code 6

    OK thanks
  12. nesty

    CVT error code 6

    Thanks, no NATS on mine.
  13. nesty

    CVT error code 6

    Cheers many thanks, out of interest are replacing these units, plug and play or is there software etc to loaded?
  14. nesty

    CVT error code 6

    Hi Done a CVT diagnostic test, I am getting Fault Code 6 - The sixth blink is on longer than the others - Torque signal circuit is short circuited or disconnected. Can anyone tell me where the Engine control unit and CVT control unit, I want to see if any corroded terminals and check the...
  15. nesty

    Prefacelift CVT light intermittently comes on, but stays on during idle

    Update, I done the CVT diagnostic test procedure. I'm getting long blink on 6, which is torque signal circuit, can anyone advice, where that is. I noticed that when I put the box into D, the revs suddenly jump to 1500rpm. The CVT light goes out when you pick up speed, but can kangaroo from a...
  16. nesty

    Prefacelift CVT light intermittently comes on, but stays on during idle

    Hi My CVT light came on for the first time on my other prefacelift K11 today, it’s been running fine until now and only done 47k miles. I thought it was maybe the cold morning and the oil hadn’t circulated, as the light came on then went out, when placing the foot on the accelerator pedal, it...
  17. nesty

    K11 Idle control valve - How to clean

    Many thanks, I'll try that though since this post the garage diagnosed it is the MAF sensor, gonna re-solder the MAF again, to see if makes any difference.
  18. nesty

    K11 (prefacelift) Throttle body refurbishment

    OK thanks, it seems like the build quality of todays stuff isn't great!
  19. nesty

    K11 (prefacelift) Throttle body refurbishment

    Hi Is there a company which sells or does K11 (preface lift) Throttle body refurbishment? My garage diagnosed via plug in codes, that my rough running and low idling, point to the mass air flow sensor, I am going to do the re-soldering trick again, to see if that works, but does anyone...
Back
Top