Search results

Hi guys, the resistor trick didn't had effect :'( It still starts bad, you need to give it a tick on the throttle otherwise it doesn't start. The exhaust is black from running so rich :( Like pollyp said, I'm gonna check the sensor and I'm going to search info about the idle valve-thing...

You don't do motorswaps to be "easy" or "cheap". If you want a calculated cost, buy just an already fast car. If you want put time and effort in your pride and joy, then think about a swap ;-)

Do you have pictures of that? Thanks for the explanation!

But I saw on the new rotor that the "foot" is round, so it's very important how you set the rotor right? After replacing? You need a flashscoop to but the ignition right no? Btw: Doesn't it harm the coil? You need to disconnect the dizzy right?

Can you tell us more about the brake swap please? Is it difficult?

Yesterday I tried to replace the dizzy and the rotor. The dizzy is not difficult, however, the rotor was to stuck! It's not very handy dat the screw was upside down and it was very stuck! So I'll keep those parts for when I have more time and I have a scope to check the ignition. Besides that I...

Nice!!

Very handy topic! I have the same problems George, check my topic! https://www.micra.org.uk/threads/micra-k11-doesnt-start-after-short-drive-start-only-with-open-airbox.64445/

We will be at JAE with at least 2 Belgian cars and some dutch cars. I'll go with my '81 Celica or with the K11 Micra, I'm not decided yet :D

Thanks for your respond! About the temp sensor: It isn't easy to remove it! I measured the value when it was installed. Without the extra resistor it was 0.85kOhm and with the resistor it was 0.9kOhm If there is no difference I'l try to remove it and compare it to your sheet, thanks for the...

Hi guys, I have finally an update for you! (I was on holiday etc etc) So, about our little Micra Racer :-) First on-topic: I found an 15kOhm resistor (like was mentioned before, only the link doesn't work anymore :( ) and I connected it in parallel to the big temp sensor. I started the...

Hi r-reg-sr, I don't have access to that link. @frank: 15kOhm resistor in parallel with the temp sensor, that is what i needed to know! Do you have also experience with the tip about the air idle valve plug like r-reg-sr? edit: I forgot to mention how fantastic you guys are, thanks!!!

If I open the airbox it starts also after some throuble. But the thing is, the mpg is also very bad when the bad starting occurs and the cars smokes a lot. So it doesn't only start rich, it runs all the time rich. That is not good for MPG, oil quality, .... So I'll investigate the values and...

I did it with my Micra too, I use the cig lighter of a 1988 Toyota Corolla. It's really easy to do but you need to know "something" about car electronics Find somebody near you that can help you, It's fixed in 15min time.

Ok, I have a Haynes manual of the car so I will check the sensor. But what I don't understand Frank: Situation: There is one temp sensor which doesn't work correctly from factory. Solutions: -fix by Nissan: Can you still get it? -Add a resistor: Does anybody knows what the value should be...

I don't understand, it's about the water temp sensor right? How does connecting a second sensor in serial fix this?

Hi Frank, I read about it! Does somebody know what resistor it is? Is it something I can replicate myself? Or can you still buy it with Nissan? Does somebody know what partnr it is?

Hi guys, I have a problem with my 1.0 k11 '98. This has been the 2nd time in a short periode that when I start the car cold, move it some meters and power it off again the car won't start the day after. When I open the airbox it starts with much effort. I noticed before that it smokes sometimes...

I hope it will run just fine now...

This is a very strange story. Why would they change the spark plugs an cables? Doesn't make sense. I had a problem with my micra that it flooded (is that how you say it in English?) What I did was remove the airbox cover so the engine got more are and then with some trouble it started. But if...