Search results

  1. P

    High pressure fuel pump timing. 1.5 dci Nissan Micra 2003

    Did that one with our K11. The k12 engines aren't cheap to source. I think the best route may be to sell off as spares and put money towards a live one.
  2. P

    High pressure fuel pump timing. 1.5 dci Nissan Micra 2003

    Yes water pump pulley seized. Some of the valves damaged. There is resistance when turning the crank.
  3. P

    Nissan Micra Official Timing Chain Replacement Guide

    Link to technical bulletin. http://www.micra.com.au/technical-articles/nissan-timing-chain-procedure.php
  4. P

    High pressure fuel pump timing. 1.5 dci Nissan Micra 2003

    A quick one to all you good folk. Before I start to replace water pump and broken camshaft/timing belt on a 1.5dci 2003 plate Nissan Micra. Does any know if the High pressure fuel pump has to be timed to anything. I know some diesel engines do and others not. I'm thinking that as this is a...
  5. P

    Micra 1.5 DCi Cold start problem - Cranks okay hard to start

    May well be normal wear and tear at 147000 miles on the clock. However today the care has leaked water from the water pump area and soon after it has stalled for the first time ever. Making a rattling noise. Typical of the when a timing belt has slipped and the tooth have jumped a cog. So...
  6. P

    Micra 1.5 DCi Cold start problem - Cranks okay hard to start

    Have tested glow plug relay timer and it is checking out fine. Process for others is documented below; 1) Connect Voltage Meter -ve lead to battery -ve terminal. 2) Connect Votage meter +ve lead to Glow wire from timer unit/glow plug relay having first removed it from one of the glow plugs...
  7. P

    Micra 1.5 DCi Cold start problem - Cranks okay hard to start

    Makes no difference in that sense as the glow plugs only power up for a second at a time. So effectively I have no pre-heat at all. Ineed to find the glow plug relay itself so that I can manually force it on for 15 secs or so by applying a negative to the relays primary winding. If the car then...
  8. P

    Micra 1.5 DCi Cold start problem - Cranks okay hard to start

    Yes does start better after 2nd 3rd crank. Yes this is where the timer control module is. But where is the glow plug relay itself? Also is there a schematic for the glow timer control module shown in the link above? It would be most helpful.
  9. P

    Micra 1.5 DCi Cold start problem - Cranks okay hard to start

    Glow plug timer involved and located near battery.
  10. P

    Micra 1.5 DCi Cold start problem - Cranks okay hard to start

    Hi good people. I am in need of some wise advice. Nissan Micra diesel on 2003 plate. Not playing ball starting when cold. Have replaced battery for new and given it a full charge. Have replaced all 4 glow plugs as car is now on 150k. Two of these tested faulty anyhow. Symptoms are: Cranks for...
  11. P

    Sloshing / spurting noises behind console?

    It does sound like air in the system. Does heater work all the time? On my micra you have to disconnect the top heater matrix hose to let air out while filling up the coolant at the reservoir. When you see water at the heater hose reconnect it and you should then have no air in the system.
  12. P

    tig welding

    nissan micra 1.5 dci hard start problem when hot. any ideas why good people?
Back
Top