Search results

Here is a thought. Why don't you remove your manual speedo drive in the gearbox and install an electronic speedo gear in the gearbox and hook up the wires. This will give you a signal for your ECU Talk.

Well here is my Two pence worth. The rear discs can cool better as they are open to the air. As you will notice with fast cars, they have vents that actually feed cold air to the brakes. You don't have this benefit with drums as the part the brakes are in contact with is covered.

It seems as the fault was with the Dizzy. I opened the dizzy give it a quick wipe and rough up contacts and taped up a very brittle casing to the connectors. It has been running ok again.

Hi Tom I have paid for the armrest, can you message me when you will send it. Thanks

Just getting the things I need, before making the swap over.

The first cut makes you nervous, then its downhill all the way. I will probably be the first to try this. If it works I will share it with you all. If it don't there will be a wanted ad for part :0

Thanks to Enuo, he has done most of it. I will go over them again, before I chop and change :)

What do you reckon ? If I swap wires from my one connector plug to new 2 Connectro plug and just plug in the 2 Connector dizzy will it work ?

It does look it, is that a 6 pin connector ?

I want the actual connectors with some wire, so I can solder them to my existing loom to be able to use the micra distributor.

I opened up the dizzy today completely different to the one I took off a Micra. Anyway I put some insualation tape on some of the plastic casing over the wiring connections as they were cracked(they are not rubber cased like the micra dizzy). I put the old one back in the car. It ran for a...

davyboy will be interested in one

davyboy do you have a picture of any you have already done ?

I have one. They may have been put on the imports and Automatics. Here is the picture of it on my car. http://www.micra.org.uk/attachments/dsc00603-jpg.24091/ Do you think it will work the conversion?

This is a picture of mine. http://www.micra.org.uk/attachments/dsc00603-jpg.24091/

I have a 1.3 with the single plug on my dizzy what do you recon if I wire my single connector to two. To allow me to replace my dizzy. Will it work ?

If I don't have datascan in theory it should set to 15 degrees if I unplug tps ?

Hi Paul How do you lock the ignition timing to 15 degrees

It happened to me once a loose battery connection, caused my car to pop several times and eventually cut off and would not restart. It could be something simple. The oil may be unrelated just something you didn't notice before.

I wanted to swap out my dizzy, the one in my car has one connector and the one I want to fit has two connector. If I make the wires fit into the single plug will it work, as the amount of wires are similar just two plugs instead of one ?