Search results

I'm sorry I wrote post but I mean delete my response so the TS will have a clean topic, I run the Dutch 100NX forum as volunteer of a foundation

Yes very good that means you are aware what the cons are on a 1.0 gearbox but if you redline it anyway, do it :) btw you should have a look at speeduino, use a search, you can't use maf and you will need a wideband but then you can set your injector timing on calculated VE How's this?

Oh the trunk lid excuse my bad English. k11s will fit mechanically and for wiring that is doable or a straight fit, perhaps someone knows the latter

Just a waterpump, got mine for 23 coins :) Nice to read your topic advances. I just cleared out my cheap cv-joint replacement and my oversteer left and understeer right after a proper alignment by replacing the other (probably original) cv joint for the same 18 coin. I compared both and size is...

No indeed you shouldn't ;)

Then I recommend to add some power too but really 1.3 gearbox is real short, I can be in 4th before I leave a roundabout

This is a taillight, correct? https://ap-tuning.nl/images/diederichs/6022090.jpg

If you get the shafts too it probably will work but just tell us if that is an option for you. Happened with me but was different Nissan but same era. Don't ask me why I couldn't find a technical reason for it nor a commercial one. As Maarten said and he did, that is what fits and what not...

For my understanding and language barrier a tailgate is a different word for a rear light where I mean rear light housing?

I have someone that own a k13 and asked me how to get rid of stock antenna, what are my options since I will do this modification?

You could get a clutch that seems too grippy and remove friction on puck material (the two opposing out of six for example) and it will be slipping more, just some gearbox deinstallation reinstallation ;) Als you shoud try to find out what comes after organic, I can't tell you but that is a good...

Yes the pre facelift look better then anything else. Just look for k11 on search engine images and you will see the differences. You will see the one you have right now and the other version perhaps some Japanese maybe aftermarket but never saw those before but it will work for you

Not sure but if needed I would install it and never take it off

I would not spend too much time on hubcaps, so just sanding for removing paint that is going loose and some wheelspray and imagine how that would look when hubcab is vertical instead of horizontal and atleast 4 feet below. Or just degrease and wheelspray lightly and wait for good weather and...

This topic belongs to members rides I think? Tot the moderator please delete this post :)

I would suspect mass on that battery just at the battery and chassis. Sand mass on chassis to the metal. A known good battery only has to fit on the poles so perhaps you now have a way to test this and just don't mix up plus and minus, be aware a random battery might have it changed and actually...

I'm not saying you should buy this but it is good to put it in a topic since many people buy from ebay while TA Technix has it's own webshop. It might be unavailable and come soon but I doubt that will happen for k11. For b13 that just happened...

If you want such modifcation you should run steelies under it too

Nice to learn that a 1.6 engine didn't look it up but not very fast (sorry) can have such a fuselage. I am attempting to find the overbuild factor for our Nissans and from Toyota I am aware that the 80 - 90 cars where 150% - 200%. And for your fuselage and for example 1.2 gearboxes I saw opened...

I've seen affordable jacks as low as 3 inches probably even 2.5 but it also depends on how far it needs to be pushed under the car because even that low jacks become higher by design somewhere. Scissor jack I recommend to not even want to use it for safety issues. I do jack up my can on both...