Search results

172250616210 part number from eBay,someone selling the whole units,brackets fogs and covers for £20 a side :)

Na sorry,only did a before and after. Ideally you do need the OEM brackets as the covers clip into them to hold in place. Once the holes are cut there isn't anything much left for the covers to stick to on the bumper

Is only stuck on with 3m tape on the back for all badges. The bonnet has pins and tape

Yeh they are direct swap. Just a pain with the inner bolts hidden behind the front bumper to the front wings

I had the same problem when my nats fuse was pulled. Without changing anything I tried a method I found online,turn key to on position and leave it for about 20mins,then turn key to off and try to start then. There is also another method I've used recently after battery removal but can't...

It has one on the inside of the drum. When the cover is removed,its attached to that on the center

Which clocks do you have? The early ones had the blue light that turned red when over heating or just shut off when engine is warm,from 2005 on they changed to the chrome ring clocks which only have a red overheating light,and no blue light when cold

The CPU just displays average speed,average mpg,time/date,service intervals,trip computers,if external sensor is fitted the outside temp,just general stuff like that. 2005 on had a different combimeter that did the same and a double din stereo instead.

I've wrapped lots lol

These fogs,sorry picture didn't load

For the 2003 you need these fogs they use a different bracket,i posted the part number for them on here in the past,and the covers are on eBay from Poland,but a trust worthy company. The brackets for the early ones are the difficult ones to find,got mine by chance on eBay. You need to cut out...

Few bits done over past week wrap and new colour coded handles sorted alloys refurbing one by one.

Needed a polish before taking the PIC really lol

Also gd to look out for breaking c+c's,160sr's and jukes. They have the nice stainless tip back box :)

Jap import grills,lowered 30mml,full Nissan body kit,sx rear spoiler,renault scenic ostra 16" alloys, some camo wrap and blackboard painted bonnet

Here's what I've done to mine so far as a few ideas

The cr engines are in the note,Micra and the later cubes. All use the same chassis,engine gearboxes ect

Ideal cheers abz. You're a star :)

Did you have to power the switch itself, or can I just run wires straight off the boot switch

Mines just started playing up,thinking of sending wires to a switch in on the dash