Search results

cheers

had a bit a nightmare tonight, started car, in gear (didnt know), handbrake up, car shot forward and hit a sleeper and smashed my two g# fogs, anyone know where to buy them? can they be bought from nissan and does anyone know the part numbers? thanks

it was the light copnnecter on fire!, all sorted now but when i put full lights on the light goes dim and orange?

Hi, 1.0l gx started this problem today , only when i put on hot air a burning smell comes through car, i smelt radiator and it smelt like it was burning too, opened radiator cap and fluid was there, then fan hasnt come on since the smell and temp is just below middle on gauge, could it be...

i have 165/65 on et+6 starmags mk1 style, i scrub on rear with people in back and have highered it, i want to know if 160/55s will look well or stupid ?

Can the bearinga be greased or are they a sealed unit?

Ill give them a re grease soon enough as ill be lightening flywheel, ok just keep an eye on them so and listen out for strange noises

Will it start to whine badly before it goes like? And will wheel lock up when it goes?

Ahh thats grand then, probably go at some stage but if so ill just replace :)

hi , noticed lately when i take off theres a high pitched whine from left front and when moving very slowly its a tick in forward motion and reverse motion, when looking at the cv rubber boot theres a black wear line from the angle it is at as the car is incredibly low, are my cv joints...

Failed its nct/mot on brakes , front pads and drums need tightening, all has been done already and will pass next saturday :D

i had two, ones on mine and ones on my brothers 98 s , sorry

before: after

just another quick question, would bike carbs be able for a turbo? i know to make a turbo work with them id have to fabricate a box with 4 holes for the plenums so the forced air can be sucked if that makes sense? like this http://img189.imageshack.us/img189/7258/user20520pic26712616786.jpg

cheers, cars on its winter steelies now haha

cheers! lots more to come in the next few months, bike carbs and a little snail to liven things up ;)

you mean when the carbs are connected to the manifold they should be level accross the top of the carbs them selves? use of a spirit level? well i start work in 2 weeks and every day ill be driving 4 miles in total until weekend so it wont really matter to me during the weeks , also this is...

ok so basically to get a micra to run on carbs i need; bike carbs ( cbr600 route) make inlet manifold( offset to avoid brake servo) adjustable fuel pressure regulator ( max to 3psi) drill out jets to desired size (1.35mm good starting point) wire in tps on carbs into existing tps loom make...

i will give them a read now thanks, yeah ive seen a few pictures of intake manifolds offset to a degree to avoid the brake servo and its been noted, ill have a read of them links and post back what i under stand and dont understand

this is why ive put up this post karl after all your pointing out of go searching, nothing is clear and is all confusing, thats why i still donbt know what to do