Search results

So all I need is cg cop rail? Re route icv?

Which rail do I need? I'm using a ga15 throttle body if that makes a difference? How would I run one without?

I was told to get facelift manifold and rail to fit my top feed sr20 injectors? What do u need?

Hi, looking for a facelift cop intake manifold and fuel rail to suit top feed injectors, will need to be posted to r.o.I too

Few photos of how it stands now..

Hi , going to post all my turbo build here and my queries if that's ok . Car is a 97 gx 1.0 Micra, has had full respray in Atlantis blue BMW with full march g# body kit and spoiler. Will be running car at low enough boost about 5 or 6 psi until confident it can take more Engine spec as...

Hi , looking for parts or complete kit for a td04 kit for my cg13de distributor engine, thanks

Was speaking to a Micra hot rod builder this evening and he reckons if I install 1st 2nd 3rd from a 1.5 sunny that it would be a lot quicker? Gearbox would be cg10 , opinions please..

.5 of a mil or 1 thou of a mil is what he said if i can remember right

and ive had block skim and head and pistons, something is not right!

spark plugs a black with sut and threads of spark plugs have oil or petrol on them as wet( could be petrol mixing with sut) its as if its not burning all the petrol , my fuel reg is just above 4 1/2 bar , auto sprint cams told me to uprate fuel to get car to idle right , is this too much? when...

Really? what should it be?

he reckons the rings havent bed yet ( ive only driven 5 miles) and thats whats causing my bad idle and blow by out crankcase, a long drive will tell alot

update: done a few more checks, -cleaned out vacuum pipe from rocker to inlet manifold (sucking fine) compression test cyl 1- 120 psi cyl2 -180 psi cyl3-100 psi cyl4-180psi now my standard 1.3 march engine from automatic is 150 psi , so ive increased compression 30 psi engine builders still...

Hi guys , going to buy a walbro 255 fuel pump today, car is 1997 gx micras ,do I need a fitting kit or are they a straight fit , supplier said some Nissans are straight fit? Can anyone tell me?thanks

Cleaned out breather system under rocker cover and ran car without thermostat and a little bit of good news ,things noticed: Car idles now (dies after a few minutes though) Not as much steam out crankcase or breather (still quite a lot though) Took spark plugs out again and all were black sutty...

Stripped my wishbones and fitted my yellow track strongflex polybushes, waiting on my new balljointsand then I'll throw them back in :) Also still trying to Sort out my engines heavy breathing

Machinist reckons that i havent done hg in , he said the steam is hot water touching cold which coukd be caused by blocked rad, thermostat ,Machinist instructions was drive normal for first few miles and when sure no leaks or problems drive her on as hard as like to bed in and mechanic who...

Did a few more tests: Breather system under rocker cover wasn't too bad but I will clean it as I have it apart Engine timing hasn't jumped from when I timed it to 110* starting point I took the thermostat out and done the boiling water test but it only opened on one little spot at 4mm long so...