Search results

Hi folks, I tucked my engine bay recently on my k11, now I've my battery in the boot with a 250 amp inline fuse. I have routed my power cable (0 gauge) to the bulkhead and have ran my starter and alternator off this point. (Don't know if this could be problem or not ) My problem is that I've...

This

This is tdc on cylinder 1 , dimples in sprockets match with silver links (painted red for clarification)

I got reground camshafts off autosprint Birmingham. 272° with 3mm shims. I had to remove my dowels to advance timing to 110° starting point. With the use of a degree wheel and a dial gauge , its a very simple task

Hi , looking for ga16 injectors to suits cg13 fuel rail, also including shipping to republic of Ireland. Thanks

Perfect , will be done tommorow :)

Straight fit yes?

Also I have a ga15 throttle body , last time I used it with standard injectors and standard fuel pressure and there was a few flat spots, will these bigger injectors iron these out?

Currently have a cg13de engine and at the moment its na , have a walbro 255lph pump and adjustable fuel reg, is it safe to run ga16 injectors ? Don't want to over fuel and damage pistons or rings .

I need to put all new bulbs in first and then go from there. Should the tail lights be on the bottom of lens or top ? And same for brake?

These

Hi, I've installed these march tail lights and I just wired colour to matching colours but there were a few spare but wired to matching colours, I have marker lights, indicators ,reverse brake lights but no fog Also when brake is pushed the lights stay on and won't go off , adjusted brake...

Will do , have a fair idea now

Like the part of the fuel rail that holds the injector doesn't fit into cg13 inlet manifold? Wouldn't it be quite hard to weld? What does he do to make them fit?

Would cutting the pipe and using rubber hose work or will I need metal unions to join together? Also will the Injectors fit into cg13 injector holes?

Hi , found out I have sr20 side feed injectors rather than the top feed I wanted, can these be fitted to a k11 dizzy engine? Would I be able to modify sr20 rail to suit?

Is the collar to hold Injector in situ ?

Any photos so I can understand better?

Why do I need to space it?

If I put a spacer between throttle body to intake manifold will it clear fuel rail? Also can I fit cop furl rail to dizzy intake manifold?