Whoa thread from the dead lol, I have a question about the size of the fitting there is it 1/8 npt? As the seal on my sandwhich plate has let go and spilled oil everywhere. I can't find a new seal in enough time i did try one but leaked after a day so if thats 1/8 i can just shorten my line and...
Dude 3 psi on a gtr t28 bb turbo is not the same as 3 psi on different t25. So you are making over 120 atw with 3 psi? A guy over here ran his car around 6 psi (possibly 8) and got 120atw on his cg13 and thats with ga16 injectors and a safc hack. A turbo that size must just start spooling around...
I've been on some primera forums and people say they fir sr20 injectors to their ga16 so does that mean we can fit the sr20 injectors? or is the ga16 fuel rail different somehow?
Why would ga15 injectors be useless? they are bigger injectors compared to stock. I have ga16 injectors which are 180cc compared to stock 130cc which means i can safely tune without maxing them out, also i've been told for safe tune injectors shouldnt exceed 90% duty cycle for safety etc
O.k...
Woulda anyone on here be able to share their mape for an emanage which i can use to get to the tuners? The reason i ask is My tuner is far away and i would need to get on the highway which means going to atleast 3000rpm and i just want to be safe and not destroy my car.
If not then i'll try...
I want to fit a japense speedo cluster into my u.k 1.0 they cluster is pre-facelift and so is my car.
I want to know how i can fix the issue with fuel and temperature units? is it just re-wiring?
thanks for your replys, did do a search but didnt find anything.
actually $260 isn't half bad in my eyes as they aren't available here. Now gonna defo reapir the micra lying around and then start with the turbo.
What turbo is good for street driving with good power and little lag? Going with rx7 topmount to reduce lag of maybe a 3sgte chargecooler.
Looking around and i see that there are no off the shelf manifolds for the micra and wanted to know what the various members who have turbo'd their car have done.
I was thinking that if you get a manifold and cut at the exhaust plate and welded onto the CG13 flange would be the easiest...