Removing the Ignition Barrel

CMF_ChrisB

» CMF Member

United Kingdom

Member since:

Posts:

• Feb 7, 2011

• #1

Hi,

I am trying to remove the ignition barrel from a K11. Do I have to remove the clamp that attaches it in place to get the switch off at the back of it? Seem to be attached on by a sheered off bolt, and looks hard to remove.

Thanks for any help.

 

CMF_sikK11

» CMF Member

Darwin, NT, Australia

Member since:

Posts:

• Feb 7, 2011

• #2

You need a small chizel to tap it around with a hammer. Should be able to do it from the bottom i think. I did mine a little while ago and refitted it with proper bolts after that.

Small chizel and tap a groove in it then just hit it in the right direction and should come undone.

 

CMF_frank2

» CMF Member

birmingham, United Kingdom

Member since:

Posts:

• Feb 7, 2011

• #3

the little screw holding the switchblock on is pretty inaccessible without removing the shearbolts eh chris
i always use a centrepunch to remove them, and you can get a better angle on the punch if you chip some of the shrouding wall off

 

CMF_micrabits.co.uk

» CMF Member

United Kingdom

Member since:

Posts:

• Feb 21, 2011

• #4

Automatic centre punch does the trick without making too much mess.