I tried with the stock distributor but i ended u rigging a custom cam sensor on a stock distributor with a 24-1 missing tooth wheel . As for the sensors , i use the stock coolant temp sensor , a bosch air temp sensor and a tiny wideband board with a Ntk sensor . I am using the map sensor on the board with a vaccum line where the charcoal canister used to be . Also i am using NGK R8 coils .I'd also been looking at the Seafox for diy-efi, what sensors have you rigged up? I've been trying to see if the dizzy signal can be used, from what i've found out it runs a similar output to Daihatsu so you can use that setting, or change the trigger wheel in the dizzy to something like this https://www.diyautotune.com/support/tech/hardware/nissan-trigger-disc/
135cc's per minute if I recall correctly. please fact check me if I'm wrong. not too sure on the deadtime specs are and at the varying voltages though.Anyone know what the stock injector flow rate is ?
Hello,Hello guys ! I just fitted a speeduino (Sea Fox) board on my k11 . i am looking for a basemap to start with . If anyone has it , i want it