cisco
» CMF MemberAs I need a new intercooler for blue monster, I've been working out the basic positioning for it and how the pipes will flow so that they are the most efficient design possible etc.
Am going to get a generic cheap intercooler from ebay or similar for about $200 as it will fit my setup pretty well and going to see how it performs by measuring both the pressure drop and the temperature drop. That will get me started without spending a fortune, if it turns out its not so good, I can get an expensive one later on.. But I plan to keep the cheap one if its reasonable. The end tanks are pretty good and they look fine.
Just going to get a heap of those silicone joiners and some 2.5" alloy pipe and just join up all the pipework myself with hose clamps. Should be very easy. Just have to make up some little alloy bracket things for mounting the intercooler with.
Am going to get a generic cheap intercooler from ebay or similar for about $200 as it will fit my setup pretty well and going to see how it performs by measuring both the pressure drop and the temperature drop. That will get me started without spending a fortune, if it turns out its not so good, I can get an expensive one later on.. But I plan to keep the cheap one if its reasonable. The end tanks are pretty good and they look fine.
Just going to get a heap of those silicone joiners and some 2.5" alloy pipe and just join up all the pipework myself with hose clamps. Should be very easy. Just have to make up some little alloy bracket things for mounting the intercooler with.