jamier2007
Ex. Club Member
Fused*
Sent from my Nexus 4 using Tapatalk
Sent from my Nexus 4 using Tapatalk
turbo build
- Thread starter Azzydot
- Start date
- Status
OP
OP
relays only work for all the 4 injectors, and 2 fuses are good,
Sent from my iPhone using T
frank
Club Member
+1, injector plugs 1,2 and 3 exit the loom in a row, and #4 plug exits the main harness further down, you must have a wiring fault azzy
OP
OP
Thank god found the fault after hours of looking for wat it can be and tested both ecu but same voltage, tested the 4th injector for any breaks in both wires but nothing, so test from the ecu where the 4th injector goes in which is yellow and blue wire, and seems to show 12ohm which is same as doing it from top on the injectors means no break in any wires? So now i tested for live wire as @frank said for each injectors with ign on I found all the 4 are live, so they all working wires, and now my only clue was ??? ?? Open the main wrap which is on the injectors and found this like @frank said it's all in one
Sent from my iPhone using T
OP
OP
no mate coz I tryed both ways on wire and both poped on the spare injector it was ok no pops, leaving me with a faulty inejctorYou got to plug it in correct azzy
Sent from my iPhone using T
OP
OP
I have tryed too unscrew it while on mani and off the mani still very tight ?Well done for keeping at this! Glad you found the fault
Injector screw are a pita eh. I find you can get more force behind it when the rail is in the mani
Sent from my iPhone using T
OP
OP
Or try one of these (also works well for stubborn can cover bolts) http://www.sealantsandtoolsdirect.c..._P24427.html?gclid=CL-99NC89r4CFSEewwodOJcAow
OP
OP
No, don't use that
OP
OP
I mean a 18v battery one only on slow speedNo, don't use that
Sent from my iPhone using T
Oh.. I thought you meant like an SDS. Err. Could give it a go
the one I posted you can get everywhere pretty cheap though and are handy for lots of jobs.
OP
OP
No I have 3 types of drills but for this job I'll try and give it a go on 18v drill,Oh.. I thought you meant like an SDS. Err. Could give it a go
Sent from my iPhone using T
OP
OP
I just bought all 3 for DIY at home jobs and car jobs, and other one is tourqe wrench,
Sent from my iPhone using T
And the award for helpful comment of the day goes to...
Enuo
Glorified Electrician
Lol, my helpful comments are just as effective though...And the award for helpful comment of the day goes to...
not even a little bit true!
ive just read the last 4 pages and kicked my dog,,,,,,,,azzy you owe my dog a bone!!!!
il be honest though,,some people might not understand this but reading this thread makes a refreshing change from all the other car,bike,scooter,buggy build threads ive followed and done myself over the years
some threads i read you can tell when people are telling porkys or have just paid out for work and take the glory,,,,,,,,azzy,,your not mechanically minded but have taken on a major task,,,dont get me wrong you would be lost if it wasnt for this forum but its good to see you at it,,,even though its been up for sale 10 times and its been turned into a death trap its good to see all the small crappy jobs being documented and talked about
all that said,,,,,,,,,,please dont sell this car complete after youve taken it apart and messed with the wiring,,,unless you tell them everything and show them this thread,,,,you would be putting other lifes in danger doing so
il be honest though,,some people might not understand this but reading this thread makes a refreshing change from all the other car,bike,scooter,buggy build threads ive followed and done myself over the years
some threads i read you can tell when people are telling porkys or have just paid out for work and take the glory,,,,,,,,azzy,,your not mechanically minded but have taken on a major task,,,dont get me wrong you would be lost if it wasnt for this forum but its good to see you at it,,,even though its been up for sale 10 times and its been turned into a death trap its good to see all the small crappy jobs being documented and talked about
all that said,,,,,,,,,,please dont sell this car complete after youve taken it apart and messed with the wiring,,,unless you tell them everything and show them this thread,,,,you would be putting other lifes in danger doing so
OP
OP
No bads wires to it ? I have a full wiring loom going in this week, I also thought about all the money gone into it I won't wana sell it, but many members have help, and I don't think u will find a fault with my car when am done with it, no rust no limp modes, no oil leaks or smokes, I will make it a 1 year project after am done with it
Sent from my iPhone using T
OP
OP
Sent from my iPhone using T
Is the idle set too low? 1k rpm will be the cold enrichment time for 5 mins. Then it drops down to about 700-750 when it's warm. It just stalls doesn't really give us much to go on.
OP
OP
The car idles at 1k rpm on warm and after 5 mins it will cut out when I rev the car it will hold it and without gas it will cut out
Sent from my iPhone using T
jamier2007
Ex. Club Member
Sounds like bad idle speed to me.
Sent from my Nexus 4 using Tapatalk
Sent from my Nexus 4 using Tapatalk
OP
OP
no offence meant in my post mate,,iam just being brutally honest,,,its not about finding rust,smokes or limp leaks at the end of it,,,,its worrying if all the nuts,bolts,washers and connectors are fitted correctly
its like getting a hairdresser to fit your gas boiler,,,,,,,would you trust the work and let your kids sleep inside?
or letting the paperboy re-wire your house,,,,,would you feel safe?
then you come to sell your house to a young family,,,two weeks later there all dead because the fuse board blew up which ignited the gas leak
same goes for your car mate,,,,its all good that your having a good time and learning alot but please dont forget your building a road car,which you keep wanting to sell,,,,,,road car means,,kids,pedestrians,old people,other motorists
OP
OP
Thanks for the comments that's with everything on msc and other car builders no car is perfect or qualified, and people who don't post there car faults and other problems are hiding something, am atleast showing my build and telling people about my build good or bad, am only being honest, learning from scraps made me save 1000s on my other cars, and didn't see a mechainc from till now, am not hiding like others do, if u have a oil leak I'll say I do, if u have road tax say the dates like 06/06/2014 be clear, coz I am
Sent from my iPhone using T
mas12555
Rare parts nerd #JDM
Not trying to sound like a prick but theres MSC standard which isnt that great anyway except for a few guys on here (no offense to you lot) and then there is your standard.
I have done bad/bodgey things to cars but thats all bodywork or something which cant kill you. Your standard seems shockingly low azzy and your lack of knowledge gives me the belief you can make a life threatening mistake like not putting splitpins back in etc.
I have done bad/bodgey things to cars but thats all bodywork or something which cant kill you. Your standard seems shockingly low azzy and your lack of knowledge gives me the belief you can make a life threatening mistake like not putting splitpins back in etc.
OP
OP
U can't judge from post and pictures my car looks complete brand new with all parts fitted in the same way as manual says, u have to come and see the car in real life and tell me what is wrong and I'll prove the fact it's all done in orders no short cuts,
Sent from my iPhone using T
mas12555
Rare parts nerd #JDM
I am judging by your lack of knowledge... You seem to take peoples very good advise and chuck it back in there face. I sat back for awhile and watching but its just getting annoying now azzy.
I want you to be able to prove us wrong that you can make this car but still by the seems of things this is another doomed turbo project from the start.
OP
OP
am gona take my time why ? coz am busy workin, I have more cars to only think about this micra, I have other problems on cars I fix, it's not a days build and think yeh plug the key in and drive, for me am taking other good advice from ppl who has told me many things and got this running, I do note things and leave for a day am free on, something's I even do I don't even post on here,
Sent from my iPhone using T
Enuo
Glorified Electrician
Azzy's right tbf, I've seen some REALLY dodgey stuff... uncaptive cut springs are a personal pet peeve... by being honest about his aproach, he can be guided in the correct direction, and others can learn from this blog (as painful as it is in places!)
The micra club is small enough as it is, lets not start with the personal atacks again. (Call me a hypocrite on that one if you want, I probably deserve it somewhere down the line).
Criticism is best when constructive.
The micra club is small enough as it is, lets not start with the personal atacks again. (Call me a hypocrite on that one if you want, I probably deserve it somewhere down the line).
Criticism is best when constructive.
h701micra
Deactivated Account
I dont think its the lack of knowledge that's the issue. Everyone lacks knowledge somehwhere. No-one knows everything. I think what the problem is, isa the repetition. The same faults appear over n over and the same questions get asked.
I'm no angel but I'll at least admit I honestly dont think you'll complete it. Others wont say it and hide behind other comments.
Prove me wrong Azzy.. you definitely seem to have the determination to do so.
You're right though nobody's car is perfect... no car ever will be. And the "standard" will vary person to person. I know personally my own car's standard is alot lower than the standard of the parts I produce for other people... Mine is a test donkey for new parts it never gets chance to stay whole long enough to be brilliant.
BUT... we all live n learn. My car is a perfect example of my learning curve history. From pidgeon plop welding... to brilliant welds. From twist n tape 9 piece power wires.. to proper soldered, heatshrunk 1 piece wires. My car is my story.. as will your car
So... come on Azzy.. stop trying to sell it, finish it, proves us doubters wrong
I'm no angel but I'll at least admit I honestly dont think you'll complete it. Others wont say it and hide behind other comments.
Prove me wrong Azzy.. you definitely seem to have the determination to do so.
You're right though nobody's car is perfect... no car ever will be. And the "standard" will vary person to person. I know personally my own car's standard is alot lower than the standard of the parts I produce for other people... Mine is a test donkey for new parts it never gets chance to stay whole long enough to be brilliant.
BUT... we all live n learn. My car is a perfect example of my learning curve history. From pidgeon plop welding... to brilliant welds. From twist n tape 9 piece power wires.. to proper soldered, heatshrunk 1 piece wires. My car is my story.. as will your car
So... come on Azzy.. stop trying to sell it, finish it, proves us doubters wrong
let's put a bet everyone it will be done without me even coming on msc and showin off
Sent from my iPhone using T[/quote]
No no I don't doubt you will finish it.
Seriously, I just think it will be good to show everyone you can do it
OP
OP
Sorry no comments am on my bet deal with everyone on msc who said it will never be finshedThis thread could be one of a number of reason someone just got a k11
you should have got that $10 code reader from abroad azzyman
Sent from my iPhone using T
OP
OP
OP
OP
My bet is who didn't think I will do it I will prove the ppl wrong and have a Micra turbo on the roadi didnt see anyone bet you.or am i wrong
Sent from my iPhone using T
thats crazy .people needs are need to be proved wrong.
You must be furious at the "who didnt think I can do it" crowd.
and even though i think no one actually bet you --- get the heck on with it.
think of it this way...no one here would lose only you if you give up
32 pages
You must be furious at the "who didnt think I can do it" crowd.
and even though i think no one actually bet you
--- get the heck on with it.think of it this way...no one here would lose only you if you give up
32 pages
OP
OP
let me prove my point then ppl can comment about me afterthats crazy .people needs are need to be proved wrong.
You must be furious at the "who didnt think I can do it" crowd.
and even though i think no one actually bet you
think of it this way...no one here would lose only you if you give up
32 pages
Sent from my iPhone using T
h701micra
Deactivated Account
You've said this before.
No need to spit your dummy out
You need the help and advice of the msc and you know you do
- Status
