Search results

  1. Finto_GX

    Turning over not starting

    I crossed the back of the relay and the fuel pump fired up. I crossed pins 87 to 30
  2. Finto_GX

    Turning over not starting

    Mine doesn't click but when I try new relay that doesnt click either. I read somewhere that the black and red wire should have 12 v? Mine doesn't?
  3. Finto_GX

    Turning over not starting

    I've tried that, no power getting to it
  4. Finto_GX

    Turning over not starting

    Where is the fuel pump relay situated ? And is there any other relays that stop the fuel pump working?
  5. Finto_GX

    Turning over not starting

    No I can't , that's why I think its not starting. Gave 12v to fuel pump and it works like normal and fuel comes out of fuel lines, tried starting it that way and no luck.. Could it be Nat's?
  6. Finto_GX

    Turning over not starting

    Pulled fuel pump fuse and still nothing, pulled fuel pipe off after filter and nothing coming out.
  7. Finto_GX

    Turning over not starting

    Hi , My 1997 gx Micra is turning over and not starting. I'm getting no fuel. Car was running last week. So far I have changed ecu, checked fuse, checked relay at driver foot well, power at contacts 87 85. No power to fuel pump at all. I've also changed engine control relay in engine bay. Any...
  8. Finto_GX

    Oil pressure switch question

    Might try old sensor and go tighter
  9. Finto_GX

    Oil pressure switch question

    The sandwich is on oil filter housing. I didnt get a nip on sensor as i was afraid of pulling threads, old sensor threads where perfect. Ill give it a go it no sealant and tighten it till i get a nip
  10. Finto_GX

    Oil pressure switch question

    I also have an oil cooler with d1 sandwich plate if that makes a difference, ran it without sandwich plate and still leaks...
  11. Finto_GX

    Oil pressure switch question

    Hi , So my freshly rebuilt engine has an oil leak out the oil pressure switch. Ordered a new one and put a good bit of durka sealant on threads going in. Let it dry for 24 hrs, started it up and an even bigger leak from sensor. My questions are: -Could oil level be too high? -Do I need a...
  12. Finto_GX

    Slow starting issue

    Does a standard battery fit under seat ? Or do I need a smaller battery?
  13. Finto_GX

    Slow starting issue

    If it was battery voltage drop. Would moving battery to under seat make a difference ( shorter cable length) ?
  14. Finto_GX

    Slow starting issue

    Haven't had to with new battery but with old battery it did
  15. Finto_GX

    Slow starting issue

    Any solution frank? I used 0 gauge wire with 250 amp fuse
  16. Finto_GX

    Slow starting issue

    Car is 1997 gx with 1995 1.3
  17. Finto_GX

    Slow starting issue

    Hi , Recently had my cg13 rebuilt and timing advanced with 272° cams. Tucked my engine bay and put battery in boot. My problem is every time I start the car it sounds like I've a dead battery and sluggish to turn over but it does start every time. Battery reads 12.58v when car off and reads...
  18. Finto_GX

    Meter fuse wiring diagram

    Faulty battery was the cause. Battery had faulty cell.
  19. Finto_GX

    Meter fuse wiring diagram

    Cheers frank , will change the wires now and report back
  20. Finto_GX

    Meter fuse wiring diagram

    Also if anyone knows what circuit the meter fuse controls that would be great also thanks
Back
Top