Search results

Thank u Sent from my iPhone using Tapatalk

So I need 4 washers all 1mm each ? Sent from my iPhone using Tapatalk

B and q ? Sent from my iPhone using Tapatalk

Right I have been to bulleyes motor factor and they haven't got 1mm spacers only 8mm and 10mm are you sure it's 1mm that is very thin ? Where did u get yours from Sent from my iPhone using Tapatalk

my boost pillar not the best looking but fits bang on Sent from my iPhone using Tapatalk

Taking light out is the only option then Sent from my iPhone using Tapatalk

Wouldn't it clear with obd reader plugged in Sent from my iPhone using Tapatalk

Just checked altarnator before that's fine , it's the battery wat died out coz the altarnator wasn't charging the battery, so need to add a live wire into the starter to altarnator Sent from my iPhone using Tapatalk

a good clean up and we have something pro Sent from my iPhone using Tapatalk

Ok after checking today i got under 5volts on the battery with cranking it up, so it was a brand new battery but it's gone flat, I also got the starter switch into a live battery and still wouldn't crank fast, so now I know the ign switch is fine, the battery died after few cranks but why ? So...

Down pipe to back box with silencer Sent from my iPhone using Tapatalk

making a full exhaust as I said last time it's very close under tunnel got the angles right and cut and welded in place, need to flush it and clean it up, Sent from my iPhone using Tapatalk

I haven't got a cable but I will try that way u said Sent from my iPhone using Tapatalk

Consult cable for which Ecu lol Sent from my iPhone using Tapatalk

Battery is 12.38v and I haven't checked the starter meter volt yet but I will crank it how u said and get readings thanks Sent from my iPhone using Tapatalk

Yeh true I can check the starter first see if bushes are worn, if it turns with live wire then it's defo ign switch, I doubt I need a pro to check it @frank Sent from my iPhone using Tapatalk

I haven't checked that I think it's easy to put a wire from starter wire which is red/black onto a live and see if that's spins Sent from my iPhone using Tapatalk

having problems My car cranks so slow, and sometimes would not crank, battery is over 12v and I have 3 ground wires in car and on the engine, am thinking can it be a fault on the ign switch ? Has anyone had this problem before lights and everything Esle works Sent from my iPhone using Tapatalk

Yh it's working just checked the plastic filler am using its solid but needs sanding hard Sent from my iPhone using Tapatalk

Yeh I will go to 1mm which everyone uses and haven't got the spacers that size so Tommow is getting washers and try that, thanks Polly Sent from my iPhone using Tapatalk