Search results

Remade the panel and removed the sd card unit as there is a downloader built into the software so it's not required anymore. Sent from my WAS-LX1A using Tapatalk

Quite a lot if you add in the cost of the Megasquirt MS3X and paying for the TunerStudio software. The Raspberry Pi's and the screens are quite cheap though. Sent from my WAS-LX1A using Tapatalk

Powered up. Without and with the clear instrument cluster screen. I've redone the display in blue and white, but as its not connected to the ecu its greyed out the colours.

The Raspberry Pi3 fits like a glove and actually clips in. Just by luck mind, and not my Dremelling skills.

Next i needed to measure how much to remove from the rear. You've got to love the Dremell.

Well, yes there is Andy. Here's a little update on the lcd dash mod. Stripped down an old instrument cluster.

Here's the link to my Megasquirt MS3X f/w ver: 1.51 tune. It's set to fully sequential fuel and spark on a coilpack engine so you'll have to tweak the settings accordingly. If you just want to use the spark and fuel tables which are 16X16 just export them from my tune and import them into yours...

Scrapyard from a 5 door as the doors are lighter. That's you're best bet. Sent from my WAS-LX1A using Tapatalk

Coilpacks or fuel injector issue. Sent from my WAS-LX1A using Tapatalk

I have a Megasquirt map you can have that I made for my 1.4. I'll send it to my Dropbox account and post the link for you over the weekend. Sent from my WAS-LX1A using Tapatalk

Why don't you read the fault codes and see what it is. £5 for a Bluetooth dongle and a couple of quid for the Torque app. Sent from my WAS-LX1A using Tapatalk

Yes you can fit the inner arch protection without fitting the under trays. Sent from my WAS-LX1A using Tapatalk

There are two plastic pieces that fit to the under side. They join in the middle of the front cross member and go back to just before the sump and out to the sides. Most ppl remove them or don't refit them after working on the car as they trap water around the cross member and hinder getting to...

Finished. Well, almost. Waiting for a USB lead to attach to the rear of the panel connector before I refit it all back in the car. Sent from my WAS-LX1A using Tapatalk

Haha. I work nights. Sent from my WAS-LX1A using Tapatalk

Drill a couple of holes for a data logging switch and usb tuning port, both back to the Megasquirt ecu. Bond in the usb connector.

Now we need to make a new faceplate.

If you've read through my blog, then you'll have seen the outside temperature display that i fitted to the centre console. I've decided to re-make it moving it over to the left so i can add a couple of extras. First, lets add a remote SD card from the Megasquirt.

Testing out to see the lcd brightness during the day, and also if it'll look OK. I'll also be changing the colour to blue, like the rest of my lighting. Sent from my WAS-LX1A using Tapatalk

Decided to setup an lcd dash using a Raspberry pi 3. Setting up the shutdown script so I don't corrupt the os on the sd card. Sent from my WAS-LX1A using Tapatalk