Search results

First, theres 2 engines people call 1.3 the cg13 (1.3) and cga3 (1.4) what year is your current engine? The gearboxes are all interchangeable as far as I know apart from that the only other difference is the prefacelift 1.0 has a 160mm clutch and the 1.3 1.4 and facelift 1.0 have 180mm clutch...

Almería tino not Almería, its the family carrier

Only accessible from behind I'm afraid, you have to remove the dash, not too difficult but not the easiest thing to do either

An alternative would maybe be chrome vinyl wrap? Shiny stuff, dunno how easy it would be to get a good finish though

Actually if you want next time I'm at my parents house I can measure my other k11 as its first facelift and probably has the mounts on it. I can get some photos too

If you make them I'd appreciate the measurements if you don't mind, as I have to do the same but postage would make it stupid expensive I would think. If its not too expensive I'll buy a set too

Do you think it maybe could solve itself after learning new lamda values ??

I don't think facelifts came with rear arbs, my 1.0 didn't even have a front one, and the rear axle doesn't even have the mounting points, only found out recently when I bought both and couldn't fit rear

You can get them off a nissa. Almera tino or xtrail, mines the same

Also you can run the 1.0 ecu as the spark maps a tad more agressive

Automatic or manual won't make a difference unless your swapping gearbox too. It advisable to use 1.0 gearbox because slightly lower ratios. Automatic engine is slightly stronger too as its closed deck but really if your not turboing or going high comp shouldn't matter

Sad to hear about it being neglected although probably best you got it and not someone else that would have just scrapped it

I got led bulbs in red, smd LEDs not them 5mm ones, plenty bright but I think ones damaged or something because it feeds back to the front lights. Probably just a bad bulb though

Stock Micra fronts have 2 12mm mounting to chassis iirc and the bottom bolts are 15 or 17mm. Then the top mount nut I don't remember

Holy c**p Batman drives a Micra

Let us know how it goes

Oops that post was meant for my blog, sorry. Can anyone move it?

The dizzy ones work in coilpack too, but not viceversa

Are you spraying proper 2 pack paint or from a can?if its the proper stuff you dont wanna wait more than 24 hours between base and clear. And yeah basically if your not gonna sand the clear before one last layer, do one or two medium wet coats and then 1 or 2 wet coats.

Yes they will