Search results

  1. infinity

    infinity´s blue meanie

    Set of blue wheel nuts to go on when I refurb these 14s from a seat
  2. infinity

    PollyMobiles Rebuild

    Hammerites just a synthetic alkyd enamel, dries hard but needs a minimum temp to evaporate the solvents, after that curing can take up to a month even more, but its not sticky during that stage. The wrinkling is the solvents from the hammerite evaporating under the hardened layer of acrylic...
  3. infinity

    what did you do to your micra today ?

    That's without the cables or anything trigger wheel etc
  4. infinity

    Rear coil spring upper seat corroded

    Just re read my post, want to make clear that slight rust is ok as long as its still structurally sound. Hope you didn't take it as bit of rust = no hope haha
  5. infinity

    Rear coil spring upper seat corroded

    Removed probable means the have coilovers on the backz, but if your shell is rusty, and the top of the shock is rusty this would be equally as dangerous
  6. infinity

    what did you do to your micra today ?

    Its so inspirational reading @pollyp and @MicraPRO blogs seeing as both say the same thing at the end. Lots of ups and downs but never give up. Cmon peeps don't scrap your micra
  7. infinity

    what did you do to your micra today ?

    I like the standalone management
  8. infinity

    Hickup when accelerating !

    Tyres won't change much, I ran 195/55 r15 with barely any change in milage ( motorway driving).
  9. infinity

    User manual

    I found a 9mm bullet in my mums civic she's so ghetto
  10. infinity

    Cg10 flywheel

    The pre 98 is for a 160mm clutch the 98 is 180mm and the after 2000 coilpack engines have timing wheel as part of the flywheel
  11. infinity

    PollyMobiles Rebuild

    Would a homemade cylinder leakdown tester not help you answer a lot of your questions without taking apart the engine?
  12. infinity

    Alltorqueuk: Youtube channel

    Nice! I quite enjoyed the other videos
  13. infinity

    Wanted Nissan k11 engine

    It looks like cg13 to me too and like frank says, if its got a dizzy should be good to go. BTW nice info on the tps, I had no idea the automatic was different
  14. infinity

    Wanted Nissan k11 engine

    Does the 1.3 still have the flat plate where the silicone is on yours? Two connector seems normal to me but without a photo I. Not sure
  15. infinity

    Wanted Nissan k11 engine

    Automatic will be fine. The throttle body looks fine to me too. One connector for throttle position sensor and one for the maf sensor
  16. infinity

    Repairing dash vents.

    The screwed into back of the dash so I wouldn't think so
  17. infinity

    Wanted Nissan k11 engine

    No problem, post up whatever you get
  18. infinity

    Boot

    Some people have used k10 boot lights I've also seen them on aliexpress that were similar
  19. infinity

    Wanted Nissan k11 engine

    Your engine is not a coilpack, its a dizzy ( distributor type) any 1.3 that doesnt have 4 big blocks on top of the engine will work. In the pic of you engine you have 4 cables going into top of the engine a coilpack has 4 square things. I'd get the engine from the lowest milage car, Apart from...
Back
Top