Search results

  1. Mark :)

    what did you do to your micra today ?

    stud measurements are 4x100 and i believe the centre bore is 60.1mm @Se@n
  2. Mark :)

    My MICRA project

    Hahah when you are in there buy some scotch pads, this is one of the most important things to do pre paint! Have a look on YouTube if you need to mate! Sent from my iPhone using Tapatalk
  3. Mark :)

    My MICRA project

    @Se@n i just used satin black mate
  4. Mark :)

    My MICRA project

    Sean do it mate looks so much better and @infinity I didn't torque the head bolts down enough so coolant was leaking into the cylinder causing it to burn a shot load of smoke when up to temp, so I took the head off checked gasket, reinstalled and torqued using neighbours torque tench as mine...
  5. Mark :)

    My MICRA project

    It's okay mate easy enough to fit too just use a load of self tappers! Yeah mate just drill pilot holes first and then use self tapered tappers too! Not saying my car is held together with self tapers but they work well!! Sent from my iPhone using Tapatalk
  6. Mark :)

    My MICRA project

    Quick update, The car is now running sweet @frank just took a leaf out your book with torquing [emoji23][emoji23] Sent from my iPhone using Tapatalk
  7. Mark :)

    My MICRA project

    It's of a seat Cupra r mate and yes Sean that's the one mate Sent from my iPhone using Tapatalk
  8. Mark :)

    My MICRA project

    @Se@n what the surround or the actual plate? Both off eBay mate, just typed nismo plate surround on eBay and then also pressed plate too! Sent from my iPhone using Tapatalk
  9. Mark :)

    how much would my micra be worth?

    @--alpina-- sorry didn't mean to be so blunt, I really want to go down the road of an eventual turbo setup, I would be interested in a few bits and bobs and was wondering what sort of figures you would be talking? I Sent from my iPhone using Tapatalk
  10. Mark :)

    how much would my micra be worth?

    How much for all hardware? Sent from my iPhone using Tapatalk
  11. Mark :)

    My MICRA project

    the expansion tank is full mate! @davyboy
  12. Mark :)

    how much would my micra be worth?

    are you planning on selling your turbo setup?
  13. Mark :)

    My MICRA project

    White smoke in the exhaust. All engines produce a small amount of visible steam in the exhaust when they are first started on a cold morning, but if you see white smoke when the engine is running at normal temperature (and it is not below freezing outside), there could be coolant in the exhaust...
  14. Mark :)

    My MICRA project

    after reading other threads on different cars some people say it always happens and a lot of people are saying white smoke - coolant blue smoke - oil, i must be burning coolant, it does get up to temperature quite quickly now too?
  15. Mark :)

    My MICRA project

    yes smells off something just can't identify what it is, maybe oil?
  16. Mark :)

    My MICRA project

    okay i will have allow when i check why it is slightly sticking? cheers @frank also would you be worried about the white smoke from exhaust?
  17. Mark :)

    My MICRA project

    @frank how do you mean? its all been put back the way i found it
  18. Mark :)

    My MICRA project

    okay @Huggy444 ill go give that a try in a minute or maybe tomorrow :) the cable seems a bit slack so will have a look into it all! cheers for the he;lp though mate!
  19. Mark :)

    My MICRA project

    i have left it for about 30-45 mins and still happens, it all sounds sweet and i have set the idle and dizzy too, i think it may be just a build up of condensation in the cat, also in the engine due to the head being off for a long time? the only problem i do have is a sticky accelerator? how do...
  20. Mark :)

    My MICRA project

    @Seanmicra I wish I could but can't as can't drive!! Shall I just leave it running for an hour? Sent from my iPhone using Tapatalk
Back
Top