Search results

Ed replied and passed on Mark's detailed at Tornado, to whom I've emailed. I've also emailed Emerald who are a 30 min drive from me but I know going full standalone is gonna be pricey. So its pot luck whether the stock internals take it or not and for how long...hmm...

Done some searching and tried to digest as much info as possible but theres so much that gets asked over the years. So the ringlands are the first to go, Frank mentions his went at 20+ psi. I only plan on running minimal actuator pressure (5-7psi) so I should be good. Engine management is a...

Many years ago I attempted to turbo my red K11, and it seems I've gone full circle, not by buying another red K11 but going down the turbo route too. Spent the day over at Chloe's removing the CGA4DE from Lee's car. I caved into peer pressure and bought a manifold and turbo too (oops) I'll...

A few updates rolled into one I'll start with the most obvious one from the first photo...the kanjo door boards. This was one of the things I wanted to tie in the kanjozoku style and it happened to be one of the last things lol. You'll usually see the osaka kanjo hand or hockey mask but with...

Great to see another Norfolk member, I do remember seeing your black Super S months ago

Here's quite a large update :) Gizfab X Brace installed Another item from Gizfab was one of their Devil Wings. This was something I wanted to fit as soon as we got the car and would help with the Kanjo look. Browsing FB marketplace and eBay every day for a new steering wheel started...

I honestly don't know I'm afraid sorry

On Monday 27th July we welcomed our daughter Mia Rose into the world. Mum did an absolutely amazing job and active labour was just over 3hrs long. She's yet to go out in the R34 yet as we still need to sort out the car seat (isofix in the daily Mazda 6 is a god send) After damaging the Work...

The first update in this post isnt very exciting but it's one of those little jobs that needed sorting. With the Almera GTi seats fitted, the stock fuel/boot release lever wouldnt fit next to the seat. I relocated it to the opening behind the seat where the rear door card would have been and...

Small update With the interior stripped and the sun visors replaced with the 5 panel wink mirror, it got quite dangerous when it came to driving during sunset. A friend helped me fit a sun strip which should solve this issue I decided to make a DIY front splitter made from garden edging, the...

Thank you Max :) Its good to be back!

Luckily I found a couple of members on here who had previously fitted them too, which made the decision abit easier

After searching on here for which set ups use, its a combo that was recommended so went with it? I should have measured them before fitting them

Its been a busy few evenings working on the car. The lower trims and corner bump strips got painted gloss black to match the grilles and fog light covers The 14" BMW Bottletop alloys finally received a coat of paint. One of them isnt the great of conditions so I'll be on the look out for...

Great work so far! Its amazing how much difference all of the little jobs make

On the previous K11 I had some DTM mirrors fitted with what seemed to be one of the very few sets of base plates in existance. Having failed at finding them again I was on the hunt for alternatives. I came across a website which had a large selection of photos of mirrors and I came across VW...

I believe these were fitted on the 98-00 facelift, held on with self adhesive

I've always loved the look of the BNR34 V Spec II rear diffuser, unfortunately they're expensive second hand and even carbon fibre copies are £1k. So i decided to attempt to make my own using inspiration from it. I'm by no means a fabricator so please be easy on me lol The first decision was...

Oh I also forgot to ask about Exhaust manifold/front pipe, would I need a prefacelift one?

Hello, I've searched and found most of my answers just need clarification. The car is a 2002 coilpack 1.0L I'd like to fit a 1.3 prefacelift dizzy engine. I understand the 1.0L gearbox, clutch, flywheel and driveshafts are to be used If I was to swap the heads over, would everything be...