Search results

Cheers mate & thanks @pollyp

Where did you order this from fella if you dont mind me asking?

Matt would you know if the internal clusters are interchangeable between the dizzy & coilpack boxes?

Through a skyline one on lad, straight fit but slightly longer pedal

Go on then mate whats your address

Can i ask what the pull was like on hills Dave? Im in two minds of which box / combo to use. Or just refresh the 5.1cwp setup i have now (with the machined box housing) (the selector rod has been ground for clearance which has always concerned me!

Solved the lean running and popping issue, cylinder 3 was giving a little pop of back pressure on idle. There is a pair of tiny pin holes in the weld pulling air in, the manifolds back off, ground out with a good mix of chemical metal to repair that gap. Il let that cure in the house for a few...

Have you ever run the full 8 injectors Dave?

@pollyp it's on the to do list mate :)

Raining all day but I've finally got everything back together and running. Mapping needed to update the TPS position (very lean and piping and banging all over the place) Balancing the butterfly's in needed as well

Will you be in amongst the highly modified crews then Matt? I wouldnt mind but the Yoko's have under 200 miles on them!! so will have to be kept as a track day tyre i guess

Thank you guys :) Another change i forgot to mention thanks to the kind folks at the MSA my AO48R tyres cannot be used in a road going class! So this year il be trying the Toyo 888R out in a 185/60 setup on a slightly narrower wheel (BMW bottle caps)

@Low Rider @pollyp @SuperUno Gents any recommendations for gearbox oil when running an LSD?

An updated bilstein damper and Tarmac spec Spring would be about the same cost as a single coil over Martin of that's an option

Started the inlet rebuild :) Down draft k11!

Ah thanks Frank! I couldn't remember if the factory pinion was integral like the after market ones! At least with the long gearing I can take it to UK track days!

Just a standard box with refreshed bearings Dave. 3.8 final drive i guess? id be happy with a longer drive as its screaming at 7K nearly to get 100mph at the minute and its all out of breath in 5th. I do have a 1.0 coilpack box with the 4.4 final drive. But im not sure if i can swop the...

2016 Update Hi folks, a bit of an update for 2016 so far. The 3 day hillclimb will see the car out for all 3 days again this year with a 2 day sprint in the pipeline for near the end of July fingers crossed. The 90deg inlet adapters are welded up & being honed flat. I've made various size...

The plastic cam cover gaskets go around the bolt holes from what i remember mate, the metal ones dont.

That's your reverse sensor