Tomk11's latest activity

Johnny also welded the air box connection, its a piece of 70 x 35 aluminum box with a short piece of pipe for the air filter to attach...

The fuel tank is made form 2mm aluminum with a cap I got from Demon Tweaks, my mate Johnny welded it for me, he's really good. There's...

I asked a local kitchen counter top company if they would measure for the panels using a Proliner 3d measuring machine. They gave me a...

Using the stock micra front suspension struts would mean the ride would be very hard (Micra 820kg midget car 340ish kg) and sitting at...

Rear suspension. The box section lower part of the rollbar has a tube welded in place. This has a push fit polyacetal bush inserted and...

The engine has to be naturally aspirated with a max choke size of 1 & 1/4". I sourced an SU carburetor from a1970's mini 850cc and made...

The regulations say you can alter the exhaust back as far as the first bolt on item to the exhaust manifold, so I cut the top section of...

The distributer had to be altered to be mechanical electronic ignition with a coil which means I wont need to use the ECU, have any...

Next up, final assembly, engine cooling, carburetor fitting, suspension, flooring, pedals, steering........ The Micra thermostat...