Recent content by CMF_Greo

Tyre stretching is putting a narrow tyre than standard on a rim. They will fit. Rolling radius might be put out a little bit depending on profile of the tyre. Normally done with an adjustment in tyre profile so that wheels will fit under guards without fouling, or to maintain a certain...

How loud is the exhaust? I do not wish to sound like a P plater...

Yeah I trialled e10 in my '95 K11 Dodgey fuel economy, car didn't seem to drive as well. I run 95octane in mine and get great economy (better than on 98)

Are the weather shields the big bubble esk ones or the smaller Jap styled shield?

When you do get new handles buy some bumpers trim paint from repco/super cheap and paint them. Gives them a nice black finish and protects them from sun damage

If by width you are referring to the depth that the speaker sits in the door? I think you want to keep it to about 55mm, best bet is to pull out one of the old ones and use it as a guide and when you do install the new speaker do it with the window down just to double check. There is a bit of...

if the dimmer is unplugged none of the dash's "park" lights will come on when the headlights/parkers are turned on

KNOTAN CrazySwede's RWD K11 https://micra.org.uk/cmf/message/62230

http://www.diamondracingwheels.com/ do a range of steelies, but would probably be more costly than getting some modded

found a pic of my car too

New Thread to save from scrolling Part 1 https://micra.org.uk/cmf/message/50990 Part 2 https://micra.org.uk/cmf/message/70336 Found a Micra tumblr http://micraboy.tumblr.com/

Yes they will fit. The Micra is know as the March in Japan. Just make sure they are for the k11 or the ak11. Not the k12

The rpf1s look great The super s front isn't a lip it's a whole front bar. Unless you are looking for a nismo lip. A possible alternative is to use a lip off a getz as they fit with some persuasion

I will probably be out. There is a big all day session of drift out at QR that day I am going too