You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser.
-
A
andy reacted to
pollyp's post in the thread
PollyMobiles Rebuild with
Like.
2024-04-02 Print Bucket Dirt Guard
Was browsing through halfords and was curious about having a grit guard in my rinsing bucket to keep...
-
A
andy reacted to
pollyp's post in the thread
PollyMobiles Rebuild with
Like.
pulling the old sticker off the boot lock bung damaged the paint, so I masked it off
primered
and painted it. was the wrong paint...
-
A
andy reacted to
pollyp's post in the thread
PollyMobiles Rebuild with
Like.
2024-04-01 Test LED Underglow Battery Life
During the upcoming long car shows like Japfest Silverstone I didn't wanna rely on draining...
-
A
andy reacted to
pollyp's post in the thread
PollyMobiles Rebuild with
Like.
2024-04-01 New Bench Grinder
I didn't like how the new grinding wheels were loose on the old grinder shaft (cos the old shaft was...
-
A
andy reacted to
pollyp's post in the thread
PollyMobiles Rebuild with
Like.
The old GREY generic bench grinding wheels was struggling with sharpening my HSS cutting tools, turns out I'm suppose to use White Alu...
-
A
andy reacted to
pollyp's post in the thread
PollyMobiles Rebuild with
Like.
Reinstalled the heatshield under the gear stick to stop the exhaust from cooking my gear selector bearings
-
A
andy reacted to
pollyp's post in the thread
PollyMobiles Rebuild with
Like.
2024-03-30 Rebuild & Replace Door Mirrors
For the past few yrs my passenger mirror was always too shakey to view, and now I have enough...
-
A
andy reacted to
pollyp's post in the thread
PollyMobiles Rebuild with
Like.
Ordered a pair of NTN 4T-30208 bearings for the LSD diff and a SKF 6305/C3 to fix the rattling old input shaft bearing
Visited Jack...
-
A
andy reacted to
pollyp's post in the thread
PollyMobiles Rebuild with
Like.
Gave Jack a lift down to Whitby today where he's buying another Micra 😁
Kassandra drives alot smoother now without the old annoying...
-
A
andy reacted to
pollyp's post in the thread
PollyMobiles Rebuild with
Like.
2024-03-27 Replace Rear Speakers
For the past few months the rear right exposed speaker must have got some debris stuck inside the coil...
-
A
andy reacted to
pollyp's post in the thread
PollyMobiles Rebuild with
Like.
Removed the old single gas-strut
The old ball-joint sat too low at 15mm, making the strut rub against the chassis top.
It needed...
-
A
andy reacted to
pollyp's post in the thread
PollyMobiles Rebuild with
Like.
2024-03-26 Lathe Ball-Turning Jig
I wanted to fit a 2nd bonnet gas-strut but thought I didn't have any spare ball-joints, so decided to...
-
A
andy reacted to
pollyp's post in the thread
PollyMobiles Rebuild with
Like.
printed this simple bracket for mounting the wideband gauge under the dash neater rather than screwed to the bottom corner
-
A
andy reacted to
pollyp's post in the thread
PollyMobiles Rebuild with
Like.
today only had enough juice to polish the exhaust tip
and begin removing stickers off the boot for a cleaner look
-
A
andy reacted to
pollyp's post in the thread
PollyMobiles Rebuild with
Like.
2024-03-23 Flat Bottom Drill Bit
The next tool to make in prep for machining the LSD cover plate is a 6mm - 12mm flat bottom drill bit...