Long time but still got W392 LMW :)
Passed last MOT with no advisories. Recent work is only a new o/s headlight since the old one had condensation. Changed the oil and filters since as well and lastely fitted the boltsbolts USDM sidelight kit.
New clocks
SR wheels
Spotted at Cribbs
I haven't been here that long but sure I saw this car on gumtree recently. Keep us updated and more pics and info the better :)
Did the previous owner say much about the car?
Some updates good and bad.
Fitted Bilstein B4 shocks all round with chopped rsr springs on the front and standard rear alto for the rear
While doing this though I discovered a hole in the driver side arch :(
It was the size of a 5p coin to start with and could've got bigger, but I...
Fitted a pre face boot handle recently and have some bilstein rear shocks. Car is on 30mm apex springs all round. Fitting the fronts are in the pipeline but getting there :) Now do I delete the rear wiper?
You need 2 pairs of rear alto springs.
http://www.ebay.co.uk/itm/Suzuki-Alto-Rear-Suspension-Coil-Springs-2004-/142008359030?hash=item21105b9876:g:uDUAAOSwa81XSx4H
Got the same head unit as me :) Should clean up those holes IMO on the front bumper (maybe drill bigger ones?) and a find a march rear boot or remove the old handle and find the nipples.
Another option is colour coding the bump strips on your bumper, then doing the same for the ones on the doors or remove them completely. Gives the car a cleaner look. For the grill just sand and paint ;)
Posted in my rear lights thread but got my pre face rear lights all fitted :)
Happy with the car and the way it looks now. Wish I had a 1.3 instead of a 1.0 but that's the age old problem I guess. Runs good anyway.
Lights are fitted now :) I cut the loom with the male connector left attached to the light. I then tested each wire with a 9V battery to see which each wire did what. After noting down all the wires, it was just a case of matching the correct wires in a terminal block.
Result
Thank you for the posts. I've got part of the loom with a male connecter still attached to the lights, so I'll strip the wires, cut the loom in the car and use a terminal block.
Will post update